For everyone who loves on-demand content and want to record their favorite TV shows and movies, they would know about the DVRs. The DVRs allow the users to record the shows and access them anytime they want. Also, the TiVo DVRs are very famous. So, if you are considering the TiVo picture-in-picture, we have all the details for it!
Picture-In-Picture Feature With TiVo
If you are thinking about the possibility of using picture-in-picture with TiVo, it’s completely possible. The TiVo DVR can be easily connected to the television, which has the picture-in-picture feature. However, keep in mind that the DVR function can only be used on only one picture.
As far as picture-in-picture is concerned, it demands two streams of signal sources, one signal source for each picture. Similarly, the TiVo DVR will only be able to send one signal. Similarly, the input procedure is important to consider as well.
Switching On Picture-In-Picture Feature
In case you want to use the picture-in-picture feature on TiVo, you will need to switch on the feature on the devices. For this purpose, we are sharing the steps to be followed in this section to help you out!
- First of all, press the “Info” button on the remote control
- It will open the new dropdown menu from which you need to choose the picture-in-picture feature (also known as PiP)
- Now, choose the on button and side by side button
Once you press the button, the currently switched-on channel will start appearing on the inset screen. Keep in mind that the inset screen tends to be smaller as compared to another screen. The inset screen will be on the right side (in the side-by-side view). On the contrary, the channel that you were previously watching will appear on the full screen of the TV.
The full screen will be on the left side when it comes down to a side-by-side view. On the other hand, some people argue that the picture-in-picture banner doesn’t come up when they hit the info button. In that case, there are chances that you don’t have the right receiver for using the picture-in-picture feature.
For this purpose, it’s important to understand that the right setup is important for using the picture-in-picture feature with TiVo. That being said, if you don’t have the right or needed setup, picture-in-picture will not work. Usually, TiVo works fine with the smart televisions that have the PiP feature. On the contrary, if you don’t have the right setup, there is still something that you can do.
In all such cases, one can opt for a TiVo multi-satellite PiP setup. With this setup, using the picture-in-picture feature will be way simpler. However, the setup needs the DVR and router to be in the same location for such setups to work.
The Bottom Line
The bottom line is that using the picture-in-picture feature is possible with TiVo DVRs. It’s best to use the correct steps (we have mentioned them in the section above) so you don’t struggle with errors. So, best of luck!