With the popularity of wireless internet connections, it’s needless to say that everyone prefers wireless connections to browse the internet and use social media. However, wireless connections are prone to speed issues and interference, which is why a wired connection is recommended. Aruba AP (access point) is one of the best choices to use your wireless connection to create a wired connection. This access point device has been designed with an LED indicator that glows in different colors to help you understand the network status. So, if the access point is blinking green, we are sharing the meaning!
Aruba AP Blinking Green Fix:
Blinking Green Light On Aruba AP – The Meaning
Aruba access point device has been designed with two LED indicators, including a system and radio. The blinking green light on the system LED means that the device is booting up and will be ready to use in a few minutes. On the other hand, if the radio LED is blinking green, it means that one radio is turned on in the access mode.
Truth be told, the blinking green light shouldn’t cause an issue with internet connectivity. If the green light is blinking on the system LED, you should wait for a few minutes to make sure the device boots up properly. However, if the radio LED is blinking green, it will slow down the internet speed as one radio will be enabled in the access mode. So, let’s see how you can improve the internet speed;
- Distance
First of all, we recommend that you reduce the distance between the access point and router to make sure there are no compromises on the internet. That’s because the extensive distance between the router and access point device will weaken the internet signals, hence slow internet speed. So, the solution is to bring the access point and router closer to each other to make sure the signals don’t drop and there are no compromises on the internet speed.
- Interference
The second solution that you can try is to reduce the interference between the access point and router. For instance, if you have placed the router in one room and the access point in the second room, it means that there are walls – these walls can hinder the signal transmission, hence the internet issue. The simplest solution is to change the placement of the router and access point – you have to bring them closer to prevent signal interference. Also, make sure there are no wireless devices around the access router and access point to make sure the wireless signals don’t interfere with the connection.
- Connection
The third and last solution is to optimize the connection with the router and access point to make sure the signal transmission is not hindered and the internet connection works properly. In particular, the connectors and cables have to be replaced if they are frayed or damaged. In addition, you should ensure tight and correct connections of the cable and connector.
All these solutions should turn blinking green light into solid green light. However, if you are struggling with internet issues, just reach out to your internet service provider!