Wi-Fi Adapter Keeps Needing To Be Reset (7 Solutions)

wifi adapter keeps needing to be reset
wifi adapter keeps needing to be reset

The online experience has been greatly improved by wireless network connections. This is very helpful for people who need to connect several clients across a shared network and have a small to medium setup.

Residential customers utilize Wi-Fi almost as much as businesses do, making it a popular choice for connection types.

When you establish a WLAN connection, which is quite similar to a LAN connection, there is no longer any requirement to connect wires. This indicates that you can connect to various devices using your router as a single point of connection.

Wi-Fi Adapter Keeps Needing To Be Reset:

You should become more familiar with the word “Wi-Fi adapter” before engaging in the conversation. If you only think of it as a device that links your device to the network, you are only partially correct.

However, your Ethernet devices, such as computers and laptops, have Wi-Fi adapters built into them, enabling them to connect to wireless networks.

However, you cannot anticipate a good connection if you are experiencing problems in this area. That is, you will experience abrupt signal drops, bad connections, signal loss, etc.

However, if your Wi-Fi adapter keeps needing to be reset, this could be due to a variety of factors. From driver issues to pending updates to a malfunctioning adapter, all of these issues can cause your Wi-Fi adapter to perform poorly.

As a result, if you’ve been having problems with your device’s Wi-Fi adapter, we’ve included some troubleshooting steps to help you get through it. So, let us get started with the article.

  1. Configuration Issues:

The most common reason for your Wi-Fi adapter needing to be reset is configuration issues. You are aware that network settings and the interrelated settings of the Wi-Fi adapter are critical to providing a stable network.

For instance, if you selected IPv4 when configuring your network and are receiving a different IP for your device, you cannot complain if your adapter is malfunctioning. Similarly, you may not realize it, but a configuration clash can cause errors in network performance.

Make Sure It Is Not A Configuration Issue

As a result, you’ll need to check for network configuration issues so you can figure out which settings aren’t working for you. This allows you to identify and resolve Wi-Fi adapter issues.

  1. Run The Troubleshooter:

When working on the most recent versions of Windows or Mac operating systems, you will discover great features that significantly reduce the time it takes to solve a specific problem.

Speaking of which, the troubleshooter feature in your device allows you to check for any software issues that the selection may be experiencing, and it will perform any necessary troubleshooting to resolve the issue.

As a result, you can simply go to the Wi-Fi adapter and run the troubleshooter. The system will detect any issues that are currently present in the adapter and will run troubleshooting to resolve them. Your Wi-Fi adapter will be reset.

  1. Update The Wi-Fi Drivers:

Often, it is not the adapter that is performing poorly, but rather the drivers that are. The drivers may be out of date or malfunctioning, causing you to repeatedly reset the adapter with no success.


Even if you have reset the Wi-Fi adapter, it may work for a few minutes before losing network connectivity. This is an indication of outdated drivers.

As a result, you must determine whether the device drivers require an update. If so, update them to the most recent version and restart the network. This should largely resolve your problem.

If the drivers have already been upgraded, your device may have the incorrect drivers installed. As a result, you should double-check that the drivers you’re using are the right ones.

Simply uninstall the driver and restart your computer. The system will now detect any missing drivers and the OEM will provide you with the appropriate ones to install on your device.

After you install them, the problem of repeatedly resetting the Wi-Fi adapter should be resolved.

  1. Power Management Tab:

As previously stated, a minor adjustment to the settings can save you a lot of time and trouble delving into complicated procedures. That being said, a simple change to the network adapter’s power management settings can be a great solution to the problem.

the power button

Simply navigate to the Network Adapter options in your device’s device manager. When you go to the properties, you’ll notice a power management tab.

Uncheck the Allow the computer to turn off this device to save power option from here, and this should solve your problem.

  1. Reset The TCP/IP Settings:

You’re probably unable to fix configuration issues and pinpoint which setting is causing the problem at this point. As a result, you can reset the TCP/IP settings on your PC, which will help reset all of the IP protocol settings.

As a result, resolving network configuration issues. Simply go to your device’s command prompt and run as administrator by right-clicking the screen.

When the window opens, enter netsh int ip reset resetlog.txt and press enter. Restart your device and reconnect to the network. You should no longer have any Wi-Fi adapter issues.

  1. Run An Ethernet Connection:

If your Wi-Fi adapter fails every minute or so and you have to reset it repeatedly, you may have a hardware problem. However, you are unlikely to encounter such cases, so it is best to rule them out.

Ethernet LED Light

As a result, simply establish a wired connection and check to see if the device is communicating with the network. If this is the case, you do not have any hardware issues; rather, the only issue is with the Wi-Fi connections.

  1. Perform A Clean Boot:

If the problem persists after this step, you may be experiencing problems with your system’s performance or background programs are interfering with the functionality of the Wi-Fi adapter.

The exact procedure will vary depending on the device, so consult a user manual to restart the device in a clean boot environment. Connect to the network and see if the problem persists.

To restore normal functionality, simply reset your device. If this does not resolve the problem, you should contact the device manufacturer for further assistance.

Leave a Comment