Samsung Blu-Ray Won’t Connect To Internet Wired (7 Steps To Fix)

samsung blu ray won't connect to internet wired
samsung blu ray won’t connect to internet wired

In recent years. You would search the internet for hours to find a good streaming service that provides quality content, a large library, and adequate DVR storage.

However, storing your video content on a streaming service that charges a monthly fee to subscribe to a plan can be costly and inefficient. This is because a single bug in your application can cause it to crash.

Entertainment services are typically delivered over a network, which means they are unstable because they can crash or experience software failure.

However, when it comes to DVDs, such situations are avoided. This hardware storage medium will provide you with greater stability and storage capacity and is portable.

Samsung Blu-Ray Won’t Connect To Internet Wired:

When it comes to competent DVD players, only the name Samsung Blu-Ray DVD players come to mind. If you have scoured the market, you may have come across some options that offer good DVD features but poor quality.

That means you can’t have a good family movie night on a 480 SD. However, Blu-Ray offers HD quality, which means a better video experience at 1080 HD resolution.

However, as this service has gained popularity, so have its flaws. One of the most common is the connection issues that Blu-Ray encounters.

If you are a frequent user, you may have encountered instances when your Samsung Blu-Ray won’t connect to the wired internet. This is a strong indication that the network requires assistance for a variety of reasons.

So, in this article, we will look at some solutions to this problem.

  1. Check The Ethernet Wire:

If you’ve connected the DVD player via Ethernet cable and still don’t have a connection, you may be having problems with the wire you’re using.

ethernet cable

That being said, if you used a faulty or old cable, there is an 80% chance that this was the cause of the failed connection.

You can either buy a new Ethernet cable or ensure that the one you have is in good working order. Try another cable and see if it makes any difference.

You can also connect another device to the other end of the cable to determine whether the problem is with the DVD player or somewhere else. If the connection fails, replace the cable and try again.

  1. Plug The Cable Into A Different Port:

The port you used to connect to the Ethernet network may be faulty or malfunctioning. To counteract this, simply connect the cable to a different router port and see if it makes a difference.

Check that the connection is not loose, as this can interfere with the flow of the internet to your device. Clip the ends of the cable firmly to the respective ports, and your problem should be resolved.

  1. Power Cycle The Router:

Because the connection is made from the router to the Blu-Ray DVD player, it is possible that the router is misbehaving or not sending out enough signals, which is interfering with the wired connection.

router antennas

This could be due to memory accumulation and overheating issues with your router, which can be easily resolved by rebooting it. This will refresh your router, give it a rest, and improve overall performance.

First, disconnect the Ethernet connection from the router. Disconnect it from the power source and leave it to rest for about 15 seconds. Reconnect it to the power supply and turn it on.

When the router has stabilized, connect it to the DVD player via a wired connection. Your network’s performance and connection capability will significantly improve.

  1. Re-Enable The Ethernet Connection:

This problem is most common on Windows, so if you have that device, you can easily perform this step. When you are unable to connect to the wired internet, the most common problem is an unidentified network.

This is easily resolved by reactivating the Ethernet network. Because the exact procedure varies by device, you should consult the user manual to disable your Ethernet connection.

ethernet

For Windows, simply navigate to the Network Connection section and select the Ethernet network option. Disable and then re-enable the option. This should resolve your problem.

  1. Network Settings And Firewalls:

Your network may be set up exactly how you want it. Speaking of which, different settings are shared by various users. But here’s the catch. Certain settings are required for your Blu-Ray player to connect to the network.

So, in order to have a successful network, your configurations must meet certain Blu-Ray DVD player requirements. Another issue that frequently arises is network security, which can impose restrictions on specific devices.

Firewalls and third-party security features, for example, may prevent Blu-Ray from connecting to the internet. As a result, it is best to first allow Blu-Ray to the security software to reduce the possibility of them blocking the DVD player connection.

Also, while the device may work fine with the default settings, if the network settings have been configured or personalized, you must prevent Blu-Ray from connecting to the internet.

  1. Your Hardware Might Be Faulty:

the hardware components

If none of the solutions listed above have worked for you, there is a good chance you are dealing with faulty hardware. The problem could be with the DVD player or with the router.

To confirm any issues with your devices, it is best to seek technical assistance. You can also try to change or replace your router with another one if you have one spare, or buy a new router because your connection has most likely failed.

  1. Contact Blu-Ray:

If the problem persists and you are unable to determine what has gone wrong with your hardware, you can contact Samsung Blu-Ray at 0800 -72678 and their professional staff will attempt to assist you.

Therefore if you are having any issues with the hardware, they will investigate your problem and provide you with the necessary procedures to resolve it.

Leave a Comment