Ensuring that your home has signals all over it is also essential. This is where routers like the Netgear WNDR3800 come in. This is one of the best devices because of how wide its range is and how easily you can set it up. Although, there are also a few complaints that people have regarding the device. This is why we will be using this article to provide you with a list of common problems that can be found on Netgear Router WNDR3800 along with ways that can be used to fix them.
Netgear Router WNDR3800 Problems
1. SSID Issue
Most people using the Netgear Router WNDR3800 have several routers inside their homes. Considering this, a common problem that you will notice people complaining about is that their Wi-Fi keeps disconnecting. The main reason for this can be that something is wrong with your SSID.
This is the name of your Wi-Fi connection is used when you select a device. Sometimes people give all of their routers the same network name which can start causing issues for your Wi-Fi. Having the same name on your connection means that the SSID will be similar or the same which can confuse devices trying to connect to it.
If multiple signals with the same name are being detected, then your device will disconnect repeatedly. This is why you should ensure that all of the routers in your home have different names. If you are having trouble trying to come up with names, then you can use the name of the room your router is installed in. If done correctly, the SSID issue should then be gone, and you can continue using your Netgear WNDR3800 router.
2. Configuration Error
When using your Netgear WNDR3800 router, you might notice that the connection gets interrupted in between or starts getting slow. This is because cache files are being stored even while you are browsing through the internet. With time these can gather up and prevent your internet connection from working. Considering this, it is important that you manually clear these files from time to time.
If you are someone who uses the internet at your home frequently then resetting the network for your Netgear WNDR3800 router once a week should be more than enough. The only thing that you have to do is take off the power cable for your device and then wait for a few minutes.
A reboot like this allows the router to remove all of its cache files so that people can continue using it easily. Keep in mind that an entire network reset might be required in some cases as well. This is where you reboot all of your modems and routers and then wait for a few minutes. Then you start up your modem first and then the routers so that all of them can stay in sync.
3. ISP Might Be Running into Issues
The Netgear WNDR3800 router is an amazing device that comes with tons of features. Usually, the steps mentioned above are enough to fix most of the problems with this device. But if you notice that your internet is still giving trouble then your ISP might be running into issues instead.
When it comes to this, the first thing that you should do is connect your device to another router and then run a speed test. Then compare the results with the speeds on your Netgear router. If the results from the Netgear WNDR3800 router are slower then your router is faulty and contacting the support team is your only option.
On the other hand, if the results from both routers are slow then you should contact your ISP and let them know about your problem. They will look into the issue In detail and then provide you with a solution that can be used.
These are some of the best ways that you can fix the annoying issue with the Netgear WNDR3800 router. If you try them all out, we’re sure that at least one will help you!