Netgear is one of the prime choices for everyone who needs a wireless internet connection. With this being said, Powerline is one of the most hit devices out there. However, some errors can adversely impact the performance and Netgear Powerline 1200 red light is one of them. So, let’s see how you can fix this issue!
Netgear Powerline 1200 Red Light – What Is It?
If the LED light has turned red on the Netgear Powerline, this means that the data rate is less than 48Mbps. In addition, there are chances that the Powerline network has a low-quality and is in poor condition. So, let’s see how you can fix this issue!
1. Power Socket
First of all, you need to ensure that the Netgear Powerline is getting strong signals in terms of power. So, your first instinct should be to change the power socket and plug the router into some other power socket. There are chances that a change in the power socket will fix the issue, but if it doesn’t, you can move to the next troubleshooting steps!
2. Ethernet Port
Okay, so you’ve changed the power socket but it didn’t fix the issue, you need to check the ethernet port. This is because if the ethernet port on the adapter doesn’t have a proper connection or link. If this is the case, just choose the other ethernet port.
3. Extra Components
If there are any extra components added to the power network, the light tends to go red. With this being said, there are any surge protectors, power strips, or extension cords, you need to remove them all and try connecting the router again. So, just remove them and you will be able to get the streamlined internet connection.
4. Dated Hardware & Software
When it comes down to the Netgear Powerline router, you need to be extremely vigilant about the hardware. With this being said, if there is old wiring or dated fuse boxes, it’s going to adversely impact the router performance and lead to the red light issue. In addition to the hardware, you need to ensure that the router has been curated with the right software that’s compliant with the model of your Powerline device. So, once you’ve optimized all these things, you will be able to fix the red light.
5. Frequency
If some high-end electronic devices are working around the Powerline router, there are chances that the frequency issues are leading to the red light. Consequently, you need to ensure that the Powerline adapter doesn’t have any extra electronic appliances around. With this being said, once you optimize the location of the Powerline adapter, the frequency issue will be resolved.
6. Factory Reset
If nothing is working out to fix the red light issue in the Powerline router, you should try factory resetting the plugs. This is because the plug is always connected to the Powerline router. So, just factory reset the plug and reboot the router. Once the router reboots, the connection will be streamlined!