Netgear has become the top choice for everyone who needs a wireless connection without any interruption. Similarly, the internet connection will be streamlined but Netgear A6210 dropping connection is one of the most susceptible tissues. In the article below, we are sharing the troubleshooting methods that will help resolve the connectivity issues!
How To Fix Netgear A6210 Dropping Connection?
1. Firmware
First of all, you need to ensure that the Netgear router has the latest firmware installed on it. The firmware is essential because it helps streamline the connectivity and other settings. The latest firmware version can be downloaded from the Netgear website. After downloading the firmware, reboot the router, and you will be able to streamline the internet connection. In addition to the router firmware, make sure that the access points are updated as well.
2. Driver
If the users haven’t installed the latest driver for the Wi-Fi adapter on the PC or laptop, the connection is likely to drop again and again. So, it is suggested to check the Wi-Fi and adapter driver on the system. If the driver is not updated, look for the updated driver online and install it on the system. To summarize, the new driver will help streamline the connectivity.
3. Power Consumption
Yes, we understand that users need to ensure minimum power consumption as it helps with internet performance and battery on the system. However, the minimum power consumption feature switched on the desktop might lead to connectivity issues. In the section below, we have outlined the steps for disabling the minimum power consumption, such as;
- Tap on the Start button and go to the computer
- Right-click on the computer, choose manage and scroll down to the device manager
- Scroll down further to the network adapter and double-click on A6200/A6210/WNDA3100v2
- It will open the advanced tab, and you need to open “minimum power consumption” from the list
- Set this setting to disabled since it’s enabled by default
4. Router Proximity
For everyone who is still juggling the dropped connection issues on Netgear, there are chances that signals are too weak to direct stable internet signals your way. If that’s the case, it is suggested that you move closer to the router. In addition, the interferences must be removed from the way as interferences can adversely impact the connectivity. Last but not least, one needs to place the router at the central location, so it gets proper signals.
5. Reboot
The best thing you can do to resolve the weak signal issue is the router reboot. This is because reboot tends to refresh the internet signals, hence optimum internet connection. So, you need to start by taking out the power cord from the router and socket and wait for at least five minutes. After five minutes, insert the power cord again, and we are pretty sure signals will improve.
6. Factory Reset
In case no troubleshooting methods tend to resolve the dropping connection issue with the Netgear router, a factory reset will be your last choice. The router can be reset by pressing the reset button for at least five seconds. After five seconds, the router will reset and reboot. Also, the factory reset will delete the settings, and internet connectivity will be optimal.