Modem’s IP Mode IPv6 Only: What Does It Mean?

modem's ip mode ipv6 only
modem’s ip mode ipv6 only

There are multiple modems out there being used for a lot of domestic and commercial purposes, and you will need to make sure that you don’t only have the right equipment but you also have the right configuration on it to make it work.

There are certain problems that are being reported over the modems and you will need to be careful about a lot of things to have a stable and convenient experience with your ISP and the router that you might be using.

There are some common problems that you will have to face with the IPv4 or IPv6 configuration on the network that you are using and such problems can totally hinder the network experience for you, leaving you with no connectivity at all for some time.

If you are facing an error message or seeing the message “Modem’s IP mode IPv6 Only” on your network, and you are not able to access the internet on such connection, that can be truly troublesome for you. A few things that you will need to know about it are:

Modem’s IP Mode IPv6 Only: What Does it mean?

First of all, you need to understand what the message reflects, and only that way you will be able to configure the network properly. So, the Modem’s IP mode needs to be configured according to the ISP that you are using to have the internet access.

If you are using an internet connection that is using the IPv4 protocol, and your router is configured to work with the IPv6 protocol only, you will be seeing this error. The router might not be supported as a whole, or it might have the limitations issues that you are going to face.

Contact ISP

If you have a router that you got from the ISP, you will need to make sure that it is compatible with the network protocol as well that you are using on the network. So, just give the ISP a call and ask them to check for the Internet Protocol that would be on your network.

If the router and networks are working on different protocols, it is going to have a lot of different problems for you. Your ISP will be able to sort out all the things for you, if you are having such conflicts between the Internet Protocol and the router that you are using.

Once you have that configured properly, you can restart the network and that is going to make it all work for you without causing you any problems.

Router Compatibility

You will also need to make sure that you are using the router that is compatible with the network protocol that you are using. The best course of action here for you to make it certain is to get some router that is optimally compatible with both of the network protocols and that is going to help you avoid such problems with your network and the connectivity problems that you might be facing.

Most of the routers that are coming out there in the market are compatible with the back-compatibility with the IPv4 protocol as well. It would be better for you to get a router that is compatible with both IPv4 and IPv6 protocol and that will help you in getting rid of this sort of error messages for good.

Enable it

Another thing that you will have to consider if you are using a router that says “IP mode IPv6 only” is to ensure that you are enabling it as well on the router settings. So, you will have to check with the ISP and that will get you a better idea about what Internet Protocol that your ISP is using.

Once you get a clearer picture on that, you can configure the router properly as well and that is going to help you with having the perfect compatibility with your network and the router that you are using.

The best thing for you to do would be to get the router sourced from ISP and have them ask for the perfectly compatible router that you can use with your network. Not only that, but you will also need to ask them to configure it all for you properly for a stable experience.

Leave a Comment

Share via
Copy link
Powered by Social Snap