Some people have large homes which is why having a single router is not enough. You can then install multiple of these devices to get signals all around your house. However, instead of this, a better solution is that you install a mesh system like the Linksys Velop instead. This allows users to create a single network all around their home that will provide them with a stable connection once they are connected. While this can be amazing, there are also some issues that you can run into. People often question “What does a yellow light mean on Linksys Velop?”. We will be using this article to provide you with ways that can be used to fix this.
What Does Yellow Light Mean on Linksys Velop?
1. Moving Satellites
The yellow light on your Linksys Velop means that the signal strength is weak. Considering this, you will notice that the internet is working but the speed you are getting is slow. The satellites used in your mesh system have to be kept within each other’s range.
This allows them to function properly and ensure that a single network remains established. One easy way to fix the issue you are getting is by moving the position of the satellites for your Linksys Velop. Make sure that all of these have blue stable lights on them before you continue using your router.
In some cases, having furniture between the satellites can also cause the signals to get blocked. You can also try moving the furniture slightly or placing the router higher.
2. Internet Issues
Sometimes the yellow light might start appearing on your Linksys Velop devices even when they are placed in the perfect positions. If this happens then there is a chance that the problem is from your ISP instead. You can confirm this by running a few Internet speed tests on your network.
Make sure that you try the speed test on several mesh routers and then compare the results. If the issue is from the backend, then you should contact your ISP as soon as possible. They should be able to look into your problem and then provide you with a solution that can be used.
3. Reboot Velop
Finally, if you are still getting the same problem with your Linksys Velop mesh system. Then there is a high chance that its configurations have started running into errors. This is quite common which is why you must reboot the network once a week or month.
The time can vary depending on how frequently you use the devices. Just make sure that you take off the power cables for all of your Velop devices. Now wait for a few minutes before connecting them back in and then wait for the device to start. Once done, your Linksys Velop will start working again without any further issues.