Over the years, technology has enhanced, and people have appreciated it all the same. The technologies like virtual reality and augmented reality is being considered the bright future, and even the biggest tech giants like Apple are working on integrating the technology into their devices. But is Apple the only company that has turned this technology into reality? We don’t think so!
In this article, we are comparing TPCAST and Vive Wireless because they have managed to develop a significant place in the market. Both products have been designed and launched by HTC, but obviously, there are some differences in the design and performance which will be covered in the article below!
TPCast vs Vive Wireless
The prime reason that this product has gained popularity is the ease of setup. However, with Vive Wireless, there are some points that need to be considered because there are extra steps involved. For instance, you will need to integrate PCIe 1x slot on the PC. This slot will be used to insert the Intel WiGig card.
This port will also be connected using the coax cable to the antenna. Now, as long as the antenna is concerned, it can be mounted wherever you want. While you are mounting it, make sure that it is facing the headset, and also, it must be in close contact with a wireless receiver, which is usually attached to the system.
However, people have been asking if other external bays or the adapter cards can be used in the slot, but there is no confirmation in that regarding because WiGig card hasn’t been able to show effective performance or support with alternate options. The receiver can be installed on the headset’s top, but there are 3D options available at the back of the Vive headset for adding the battery.
The signal transmission from wired to wireless will be amazing, and according to the experts, the latency will be minimal to zero, but it will be better to opt for wired options if you don’t want disturbance in the signals. As far as the battery is concerned, the battery life is around 2.5 hours with a one-time charge, which is pretty limited.
Given this issue, there are high chances that extra batteries will be offered by HTC to ensure there is no delay in the battery switching. On top of everything, the built-in battery us pretty similar to the smartphone batteries of HTC. The Vive adapter is highly likely to support the microphone and camera functions through built-in design.
This can be outlined by the implementation of the DisplayLink XR codec in the Vive adapter. So, if you want to use the camera, it is better to opt for official adapters. While we are on the subject, it’s also essential to note that Vive Wireless allows three people to play in the same play space if they have separate headphones and adapters.
If you are the Vive Wireless adapter user, you will need to work with the same old standard Vive because there isn’t any compatibility with Vive Pro, not yet at least. But wearing the Vive wireless can be pretty hard on neck and shoulders because the weight factor is pretty high.
Well, the first thing that we would like to address is that TPCast wireless adapter doesn’t require PCIe slots because they are designed to utilize the separate routers. These routers will be responsible for handling the transmissions between the headset and the PC. This means that users will need to install an additional router while taking care of the setting up and configuration.
But this is more of a benefit because the people who are using VR in their laptop will be able to use TPCast (there is one condition to that, using the HDMI port). Many people ponder over it because it can sometimes lead to adversely impacted performance, but for that, the ethernet cable can be used to make the connection.
There will be a receiver in the system, which is better to be installed on the headset, and around the belt, one needs to integrate the battery pack. However, there are some external needs regarding the final configuration and setup because the users need to install the VR PC-related software on the system. While we are talking about these products, one needs to talk about the VR experience, right?
TPCast has lower latency as compared to 2ms, which means that VR performance and experience will be better as compared to wired connections. Now many people argue about the signal interference, and we are aware of the signal drops as well, but if you don’t want to think about the cables and tether, one can manage to neglect the rare performance lags.
While we talk about the support, TPCast offers headset and adapter support to the only person, which is pretty limited, and you cannot possibly play the game nights. As far as compatibility is concerned, it can be used with huge software, and on top of everything, it will be compatible with Pro as well, which is pretty advanced in the field.
Now coming forward to the batteries because TPCast batteries can work at its top capability after a one-time charge, and the best part is that one can always buy additional batteries to keep the company on the go.
It is advised to keep two batteries, use one while the second is being charged, and vice versa. As far as the coverage is concerned, the TPCast adapter can be used to host the game nights because it can be used within the 16-square feet.
The audio and video quality is pretty amazing. However, if we talk about the reception of signals, there might be small glitches in the trajectory if there is a hurdle or if the head direction is changed. But this issue can be easily corrected if you put the transmitter on a high point.
Also, as you can see that this is the wired configuration, you should be considerate about using the right length, so there is no entanglement.
The Bottom Line
Well, these things can pretty tech-savvy with this article, but the gamers would be jumping with joy, we are sure. So, if you are trying to make the final decision, with Vive Wireless, you will never be able to devour the real taste of the product, but with TPCast, the entire wireless experience will become the essential accessory.