3 Ways To Deal With TP-Link Weak Security Archer A7

tp link weak security archer a7
tp link weak security archer a7

TP-Link is a famous brand that is mostly known for manufacturing some of the best networking products. The company implements tons of features on their devices which make them amazing. Talking about this, the TP-Link Archer A7 is one of the best routers that you can purchase from the brand. This comes with tons of features but there are also some issues that you can run into. One common problem that people often report is getting weak security on the TP-Link Archer A7. This is why we will be using this article to provide you with a list of troubleshooting steps that can be used to fix this.

How to Fix TP-Link Weak Security Archer A7

1. Changing Security Type

The TP-Link Archer A7 weak security message usually appears on iPhones that have installed the recent iOS update. This can be quite annoying to deal with as people are unable to use their connections on their mobile phones.

However, you should note that the problem can be easily fixed by changing the security type of your router. This can be done by logging into the online portal of TP-Link. Make sure that you do this on a device that is connected to your network.

Now go through the configurations to find the tab labeled “Security”. There should be an option to select from a drop-down list here. Out of all these, you have to choose “WPA2 AES” as your default security type and then save the changes.

2. Rebooting Router

If you are still getting the same error message even after changing the security type, then your router requires a reboot. This should usually be done by default by your device but in some cases, the reboot process might get interrupted.

Considering this, the only thing that you have to do is shut down your router and then remove its power cable. Now, wait for a few minutes before installing the cable back in. Once done, you can then start your router back up and continue using it without any issues.

3. Contact Customer Support

In most cases, the problem you are getting can be fixed using the steps mentioned above. However, if you are still running into the same issue then there is a high chance that there might be something wrong with your router.

One of the best recommendations that you can go with is contacting the support team for TP-Link. Make sure that you provide them with all the details about your problem so that they can come up with a solution as soon as possible. Depending on what is causing the issue for you, the time taken to fix it might vary.

Conclusion

These are the 3 main troubleshooting methods through which you can fix the weak security issue on the TP-Link Archer A7. Make sure to try out each one, and you’ll eventually be able to get rid of the problem in no time!

Leave a Comment