TP-Link RE450 is one of the most reliable Wi-Fi range extenders available in the market that’s designed with 802.11ac technology and promises three folds faster internet speeds as compared to 802.11n speeds. However, it can run into some errors, which is why we have TP-Link RE450 troubleshooting to make sure you can fix the common problems on your own!
Troubleshooting The TP-Link RE450 Extender
This Wi-Fi extender is designed to ensure an error-free internet connection while eliminating the dead or bling spots in the home. However, if your extender is acting up and the wireless coverage is impacted, there are a few steps that you can follow!
First of all, you have to check the position of the Wi-Fi extender because it has to be placed in the central part of the home to make sure there are no compromises on signal distribution. In addition to this, you should avoid putting the extender in a closed cabinet as it masks the antennas, which slows down the signal reception and extension. So, change the extender’s position!
2. Firmware Update
If you have recently purchased this Wi-Fi range extender and it’s still running on the factory default settings, you need to update the extender’s firmware to make sure it works optimally. This is because the updated firmware program is the ultimate necessity for creating an error-free internet connection and protecting the devices from malicious attacks. In addition to this, the firmware updates can quickly fix the software bugs to make sure the features work normally.
3. Power Connection
If your Wi-Fi extender is not turning on at all, you have to check the power connection. In particular, you have to check the power light on the unit, and if it’s turned off, you must check the power cord and make sure it’s tightly connected to the power outlet – if the cord is loose, you need to take it out and reconnect it tightly. In addition to this, make sure that the power cord is intact and there are no damages because it not only impacts the power connection but reduces the wireless range as well.
4. Ethernet Connection
Another thing you need to try is to check the Ethernet cable and make sure it’s connected to the range extender as well as the router. Keep in mind that the Ethernet cable should be tightly connected to the respective ports because a loose connection can impact the signal reception and distribution. Also, it’s recommended that you check the Ethernet cable and make sure there are no internal damages either – you can check the multimeter to determine the continuity, and if the cable has continuity issues, it has to be replaced.
5. Wi-Fi Settings
Last but not least, you have to check the Wi-Fi settings because incorrect settings can lead to signal extension performance. We recommend that you sign in to the router, check the Wi-Fi settings, and select the correct wireless mode to make sure the extender connects to the router. In particular, you could opt for 2.4GHz mode to improve the connection.