Most of the young generation has only known one form of communication and that is over wireless, either made possible through a cellular high-speed data network or WIFI. However, before the advancement of technology to its current form, several types of cables were being used to communicate effectively.
There were different cables for different purposes, like a separate cable for the internet, TV and your telephone line. Thanks to technology that things got much simpler ever since and now one cable covers all our communication needs. There are different types of cables that you can use for multipurpose communications. These cables are categorized into digital and analog-based on the signals they can carry and their utility.
The problem with analog cables is that it cannot carry digital signals and you will need a modem device to connect such cables with your TV or Computer. The digital cables are simpler and support a plug-n-play interface that is right for all types of digital devices. Since you don’t have to use any modem devices, the speed of transferring and converting data is relatively higher and there are no other complexities involved as well.
Coaxial cable is one of such multipurpose cable that carries digital signals at great speed. Before we start on how to split a Coaxial cable for internet and TV. It is important to have a look at what is it and how it works.
What is Coaxial Cable
You might have seen these cables around your house and office and not have paid much attention to them. However, they are a pretty decent medium of transferring data at relevantly high speeds. Coaxial cable is meant to cut distortions and increase data transfer speeds. Its purpose-built design doesn’t allow any type of disturbances at all that was the main issue with traditional cables being used for the telephone.
The main reason for these cables being a huge success is their price range and unique design. Coaxial cables use a single wire inside an insulation material, that is wrapped with a unique steel mesh to cancel out all the disturbances that may affect the insulation of cables or any type of distortion in the signals. On top of this mesh is a rubber coating for protection of the wires and contents inside.
This was a huge success and a step further in the world of telecommunication as it pretty much eliminated all the issues that one might feel by using those traditional telephone cables.
How do They work?
Coaxial cables transfer digital data over the wire that is the main component of the cable. A copper wire is used in coaxial cables to ensure that there are no data losses, as copper is known for its optimal conductivity. The highest quality of copper is used in these cables and the main copper wire is wrapped with insulation material to ensure that there are no data losses or any type of disturbances in the journey of data transfer.
On top of this insulation material, there is a coaxial mesh of steel that serves as a protective layer from outside signals. This mesh can absorb any signals from outside the cable so that they cannot intervene with the data being transferred in the cable. On top of all this is a rubber coating that protects the inner components from wear and tear of weather or any other conditions outside.
The interface is pretty simple and due to the ability of the coaxial cable to carry digital signals, you don’t need any additional devices to have it connected with your PC or TV. All you have to do is plug the cable in a supported port and it will do the rest.
Was To Split Coax For Cable And Internet
Coaxial cables are multipurpose cables that can be used for any type of data transfer from one place to another. A single cable can carry the data for both your TV and the Internet, which gives you freedom from those tangling wires all-around your home.
However, splitting the cable can be a task that requires attention from your part as it might cause you some inconvenience in form of signal strength, data transfer speeds, or disturbances in the wire if not done right. Hence, there are some common practices that you can decide to choose if you want to split coaxial cable for the internet and TV.
1. Using a Booster
Coaxial cables carry the digital data over a copper cable that carries this data in the form of electric pulses. These pulses can be weakened if you just split them into different ports or cables. Here comes the booster to the rescue. A booster is connected to an external power source of electricity.
The way it works is pretty simple. You will need to use a coaxial cable carrying the input signal in such a booster, and plug it to a power outlet. Afterward, you can use multiple coaxial cables from the output ports, depending on the number of ports your booster has.
Using a booster allows you several advantages like no data losses or any affects on speed if you want to split your cable. However, it may cost you a bit higher than other methods that you can use to split your coaxial cable.
2. Using a Splitter
A splitter is a simple device with interactive design and great utility for coaxial cables users. The best part about using a splitter is that it does not require any power source to work with. The installation process is pretty simple as well, and if you are using to split coaxial cable for your home TV and PC internet only, then this might be the perfect choice for you.
The way it works is simple and easy, all you have to do is plug multiple cables in it. Splitter uses a highly conductive material that shares the data being transferred through electronic signals in coaxial devices to all the other parts. The cost is a plus and you won’t have to spend much if you are using a splitter to split your coaxial cables.
The only drawback is that it might affect speed as there is no additional power source involved.