Having a device that can connect wirelessly is a blessing. You can eliminate the need for running cables in your home, and your network will be better managed and organized. Having a wireless option in DVD players, on the other hand, can be an issue.
If you want a DVD player that meets your needs, the Samsung Blu-Ray DVD player should be your first choice. Speaking of which, there are several models to choose from, but the BD-J5100 is the most popular among users.
Samsung BD-J5100 How To Connect To Wi-Fi?
It is difficult to find a good DVD player in terms of performance and features. When it comes to quality and resolution, you may have to compromise on this feature because most DVD players on the market cannot compete with Blu-Ray’s 1080 HD resolution.
Do you want to know how to connect your Samsung BD-J5100 to Wi-Fi? Users have expressed interest in the procedures for connecting the BD-J5100 to Wi-Fi in recent posts. So, if you’re reading this, we’re guessing you’re looking for the same thing we are.
However, it should be noted that the BD-J5100 does not support wireless connectivity. That means that to connect to a network, Ethernet connections are required, which may not be everyone’s first choice.
The catch is that a cable connection is much easier to set up and much more responsive than a Wi-Fi connection. This means your Blu-Ray will have a much more stable and powerful internet connection.
As a result, in this article, we’ll go over how to connect your Samsung BD-J5100 to the network via a wired connection.
Wired Connection To Samsung BD-J5100:
Because the Samsung BD-J5100 does not support wireless connections, we will investigate the process of setting up an Ethernet connection to give the DVD player internet access.
Though it is not required to connect your Blu-Ray BD-J5100 to the network, the basic work of disc playback can be done without it.
However, if you want to enjoy additional disc features, firmware updates, or live content, you must connect your Blu-Ray DVD player to the internet.
With its Automatic connection feature, Blu-Ray will easily connect to the network if you have a dynamic IP. However, if you are unsure whether you have a static or dynamic IP address, you should contact your ISP.
We will investigate the procedures for configuring your BD-J5100 for both automatic and manual setup. So, let’s look at what we’ll need to do to connect our Blu-Ray BD-J5100 to the network.
Method 1. Automatic Setup:
To begin, you need to connect the DVD player to the modem or router via a wired connection. After that, you will be able to configure the network settings.
- Connect one end of an Ethernet cable to the router you’re using.
- Your BD-J5100 DVD player has a LAN port on the back panel. Simply connect the other end to it and tighten the connection.
- You will need to configure the network now that the connection has been established.
- When you have a dynamic IP address, you can perform an automatic setup. To do this, use the player’s remote control to navigate to the settings by pressing the up, then down, left, and then right arrows.
- Now press the enter
- To select the network, press the down arrow key and then the up arrow key, and then press the Enter key to open the Network setting
- Select Wired Network Settings by using the up and down arrow buttons and pressing the enter key.
- When the settings appear, navigate to the Internet Protocol Setup Field and select the Auto feature before pressing the enter key on the remote.
- All relevant network settings, such as the Subnet Mask, IP address, and other values, will now be filled automatically.
- Once all of the fields have been automatically filled, press the RETURN button on the remote.
- No, go to the Network test option and press the enter key.
- After the player has connected to the network return back to the main menu.
Method 2. Manual Setup:
If your player does not automatically acquire network information, you may need to manually configure the network and enter the setting values.
- To begin, go to Settings and press the Enter key.
- Using the same procedure as before, navigate to Network and then Wired Network Settings.
- To select Manual setup from the Internet Protocol Setup field, use the up and down arrows.
- Now you must enter the IP address into the appropriate field. Check the IP address twice before entering it.
- After that, proceed to the next field and enter the relevant network information.
- To proceed to the next field, press the right arrow key after each entry.
- After you’ve entered the Gateway values, use the remote’s down arrow to navigate to the DNS Fill in the fields as you have so far.
- Press the RETURN button on your player’s remote.
- Run a network test now to ensure that the player has successfully connected to the network.
This is how you connect your Blu-Ray player BD-J5100 to the internet. Even though the procedures are simple, users will struggle to establish a working connection.
You are less likely to encounter errors when using an automatic connection. However, if you are manually configuring the connection, you must double-check all of the entries. The majority of the problem is concentrated in this area.
Contact Samsung:
It is not as difficult as it appears to connect your Blu-Ray DVD player to the internet. However, given that the majority of users are having trouble connecting the player to the internet, there may be issues at your end that you are unaware of.
It could be problems with your ISP, made-up IP addresses, or other issues that prevent you from making a good connection.
If you are unable to connect, you can contact them directly at 0800-92678 or visit their website for further assistance.