One of the most useful hardware features of Netgear products is their interactive LED light displays, which aid greatly in diagnosing and troubleshooting networking products. The Netgear LM1200 has a set of LED lights that can tell you a lot about the status of your connection.
The Netgear LM1200 red light is a frequently asked question by users, so that is what we will be discussing today. Because red light is always an indication of a problem, we will discuss what causes a red light on your modem and how to resolve it.
Fixing Netgear LM1200 Red Light
- Check Your Nano SIM Card:
When it comes to modems and routers, there is no universal solution to each problem. As a result, it is best to become acquainted with your device so that you can accurately diagnose the source of certain problems. We recommend using a user manual to check for LED light codes because it is the best way to have the proper information for hardware issues. Because a red light on the modem indicates a problem with the insertion of the Nano SIM card, we’ll start here.
Check that your Nano card is properly seated. Inserting the SIM card incorrectly can also result in red light on your modem. So take the SIM card out of its slot and replace it properly. Restart your modem to see if the problem goes away.
- Add A Custom APN Setting:
When working with LTE networks, the access point name is critical. Because your LM1200 modem uses LTE, it may be unable to automatically connect to the LTE network. To accomplish this, you must manually activate or add a VPN setting so that the network is recognized.
To begin, contact your mobile service provider and inquire about the APNs that they support. To access your modem’s web user interface, launch a web browser and enter the default address http://192.168.5.1. After logging in with your network credentials, go to Settings and select the Network tab. After that, select the APN option, and your portal will display an APN page. Navigate to the ADD button and click it. Take note of the APN settings information provided by your mobile service provider. Save the APN and then press the radio button. Your modem should connect to the network now that your APN has been activated, and the red light should go out.
- Incorrect APN Settings:
If your modem retrieved the APN settings automatically, you should confirm the APN information with your mobile service provider. It is possible that the settings are incorrect or that the radio cannot be activated, causing the problem.
- Factory Reset:
If you’ve tried everything and still have the red light on your modem, it could be a hardware problem. If this is the case, resetting the modem to factory settings may assist in resolving unexpected issues.