4 Solutions To Netgear LB1120 Solid Amber Light

Netgear LB1120 Solid Amber Light
Netgear LB1120 Solid Amber Light

Netgear has an LED light panel that can be used to check the status of your modem’s connection. Whether it is a network or hardware issue, the specific light codes help you understand the state of your device.

The Netgear LB1120 solid amber light issue has frustrated many users. According to the manual, this problem usually occurs when your modem is not connected to the network or when the SIM card is not properly inserted. As a result, we’ll see what we can do to assist you in getting rid of the amber light on your Netgear LB1120 modem.

Netgear LB1120 Solid Amber Light Fix:

  1. Modem Not Connected To Internet:

According to the LB1120 user manual, the solid amber light appears when your modem is not connected to the internet. When you insert the SIM card into your modem, it connects to the mobile broadband network automatically. If it is unable to connect to the network for an extended period, the power light turns amber, indicating that the modem was unable to recognize a network.

You will now need to obtain APN information from your mobile service provider. The APN profile will then be manually added to the modem. The correct procedure is outlined in the user manual. Once you’ve added an APN to your modem, it should have no trouble connecting to the network.

  1. Reboot Your Router:

Overheating modems is a common problem that can result in a solid amber light on your modem. Even though it is not the true cause of your device’s problem, it can be an issue when it comes to the device’s performance. Rebooting your modem will assist you in releasing memory and slowing down the device slightly. So unplug your modem from the power adapter and leave it off for a few minutes. Reconnect your modem to the power adapter. Examine the condition of your LED light.

  1. Insert SIM Card Properly:

A flashing amber light indicates incorrect SIM card insertion, but it is sensible to investigate further to determine the source of the problem. It is possible that your SIM card is not properly seated, making it difficult for the modem to connect to the network. Inspect the back of your LB1120 modem and remove the SIM card from its slot. Check to see if the SIM is broken or defective. Replace it in the slot and make sure that it is properly seated.

  1. Unplug And Reset The Modem:

If your modem is connected to the router, then you may unplug it. Perhaps your router is fine, but your modem is unable to communicate with it. After disconnecting the router from the modem, try resetting the modem to factory defaults.

Look for a factory reset button on the back panel of your modem. Using a paperclip, press the button. Before releasing the button, hold it for about 15-20 seconds. Let your modem restart. Look for the power light once the modem has stabilized. If the problem persists, contact Netgear support for further assistance.

Leave a Comment