Netgear is one of the best networking companies. It provides users with top-of-the-line products which include Wi-Fi routers, cable modems, Wi-Fi range extenders, and many more.
For people who want the best speeds, range, and great security, Netgear’s CG3000Dv2 is a good option. This modem is capable of delivering up to 8x faster internet speed than its predecessor. In addition, it also allows its users to connect several devices to the network at once. However, sometimes Netgear users might run into the problem ‘CG3000Dv2 Wi-Fi not working’. In case you do, here are a few ways to resolve this issue.
How To Fix Netgear CG3000DV2 Wi-Fi?
- Wi-Fi Might be Turned Off
To start with the troubleshooting, you can simply check whether your Wi-Fi isn’t switched off. In order to check this, the Netgear genie can be used. This is a powerful software designed to monitor, manage, and repair your network. After downloading it from Netgear’s official website, you can take a look at your modem’s settings and see if your Wi-Fi Is not switched off.
If that’s the case then press the Wi-Fi button on your modem to turn your Wi-Fi back on. You can locate this button by looking at the backside of your modem and looking for the button that is labeled by the Wi-Fi logo.
- Restart Modem
In some cases, your modem can slow down or even hang up. Especially, when you leave your computer running for days. By restarting your device, the modem clears its memory and fixes your issue. Considering this, you can restart your device by switching it off and then turning it back on. This might fix your problem.
- Hard Reset Modem
Restarting the modem solves minor issues. Whereas, if it doesn’t solve your problem then a hard reset is required.
In order to do this, you will have to flip your device and locate the small pinhole which says restore to factory settings. Subsequently, use a small pin or cable and hold it down the hole for 30 seconds while the device is still switched on. After performing this process, you will see that the power light on your modem has started to flash.
This confirms that you have successfully reset your modem. Make sure that your device is powered on when you try to reset it. Speaking about this, keep in mind that resetting your modem will erase all its data. This includes your IP rules and MAC addresses, so if you don’t want to go through the hassle of setting all of them up again. Just make a backup of your data and restore it after resetting the device.
- Update Firmware to the Latest Version
Netgear tends to roll out firmware updates from time to time. These are to ensure that your devices are fully secured and problem-free. Considering this, you might have forgotten to update your modem to the latest firmware update. To update it, visit Netgear’s official website and search for CG3000Dv2’s latest firmware update and install it on the router to fix your issue.