Belkin routers are one of the best ones in the market and streamline the internet connection for the users, irrespective of which internet service provider you are using. However, many users don’t pay attention to the installation of firmware, which ends up leading to internet errors. So, if you want to know how to update Belkin router firmware, we are sharing the comprehensive guide with you!
How to Update Firmware On Belkin Router
When it comes down to updating the firmware on your Belkin router, you need to check the router’s version number and model, which can be found on the bottom side of the router. Once you have information about the version number and model, you need to download the firmware. The firmware update can be downloaded from the support site of Belkin. However, before you download the firmware, it’s best to clear the browser cache to ensure there are no hurdles.
Many people don’t download and install the firmware because they think the router and internet settings will be deleted. However, the Belkin routers are designed with Restore Previous Settings feature, which allows the users to retrieve the previous router settings. All in all, once you have installed the firmware on your computer, check out the steps that you can follow for performing the firmware update, such as;
- Open the web browser and open your router interface by entering the 192.168.2.1 IP address, and log into the router. You will need to enter the router password, but if you don’t know the password, just leave the password field blank and hit the submit button
- When you are logged in to your Belkin router, open the utilities section and click on the firmware update
- Then, tap on the browse button and locate the firmware file that you downloaded and select it
- Once you have selected the firmware update file, click on the update button, and you will be able to continue with the update
- Now, press the OK button
It will initiate the firmware installation process. Keep in mind that you should not reboot or turn off your Belkin router during the process. Once the upgrade is complete, there will be an on-screen prompt, and you can press the OK button to finish the process. When the router firmware is dully upgraded, you might have to wait for a few seconds as the router will automatically reboot, so there is nothing to be worried about.
On the other hand, if there are errors during the firmware installation process, you will need to power cycle your Belkin router as well as the computer to restart the entire firmware upgrade experience. In addition, if you see that the internet connection is not working properly, there are high chances that there are configuration errors, which means you will need to enter internet settings from scratch or use the Restore Previous Settings option.
The bottom line is that firmware upgrade is not a very challenging process and will take you only a few minutes. If something goes wrong, just get in touch with Belkin customer support!