Does A Router Need To Be Plugged Into A Surge Protector? (Answered)

does a router need to be plugged into a surge protector
does a router need to be plugged into a surge protector

Having an internet router is essential for every home and office as it helps distribute the wireless internet signals throughout the space. This is why people use high-end routers, but they often fall prey to voltage issues and electrical surges. For this reason, people wonder if they need to connect the router to the surge protectors. If you have got the same question in mind, we are sharing if it’s possible and what else needs to be done.

Does A Router Need To Be Plugged Into A Surge Protector?

Yes, it is possible to connect your router to the surge protector for the router because you will be able to prevent costly errors while gaining access to more outlets. In addition to wireless router surge protectors, you can also use the Ethernet surge protectors because they help ensure top-notch security and protection of internet infrastructure against power fluctuations and surges.

Many people think that connecting the power tap and power strip is enough to protect the routers against power fluctuations, but they aren’t, and you need special surge protectors. The surge protectors are extremely cost-effective, which helps protect the radio antenna power supply (POE) as well as the internet router. In addition, these surge protectors tend to have other plugs connected to them, so you can connect to other electronic appliances.

For this reason, you can install surge protectors with routers as well as streaming devices, gaming devices, computers, TVs, and other high-end electronic appliances. For the most part, the Ethernet surge protectors are shaped like phone jack boxes and are quite easy to find in electronics stores as well as online stores.

The Reason Behind Burn-Out Of Routers

There are different reasons behind the burn-out of your routers. For instance, it has a port that runs from WAN port to POE on the router, and this route tends to burn out with irregular electric connectivity and power surges. For this reason, the surge protector is installed between the WAN port of the router and POE to prevent burn-out and increase the lifespan of the router.

Purchasing The Surge Protectors For Routers

There are chances that your home contains more plugs when compared to the number of electrical outlets. For this reason, you can simply visit the nearest store and choose the surge protector but make sure that you follow the below-mentioned points for purchasing the surge protectors;

  • You need to look at the back of the power strip and make sure the words “surge protector” are properly mentioned there to ensure you gain proper protection
  • A regular power tap or power strip cannot protect against electric surges
  • Make sure to purchase an Ethernet surge protector

To summarize, it’s imperative to install a surge protector with your router to make sure it works for years as it’s supposed to. However, it can often lead to wireless signal interference, but installing it under the desk will make sure proper protection from surges and lower chances of signal issues. So, are you ready to get your hands on a surge protector, then?

Leave a Comment

Share via
Copy link
Powered by Social Snap