Amazon is mostly known for being one of the best retail stores. You can purchase almost everything from their website. But they have recently started to manufacture streaming devices as well. The Fire Stick by them is one of those products which can be used to access their platform.
You can connect it directly to Amazon Prime which gives the user access to numerous shows. You can even add additional ones to your library by asking the service. Aside from this, there are tons more features provided to people through the device. These include accessing applications and getting fast internet speeds on your television.
Amazon Fire Stick 2.4GHz or 5GHz
If you have recently bought the Amazon Fire Stick then you might wonder if it can connect to a 5GHz channel or if it only works on 2.4GHz frequency. The short answer for this is that the Fire Stick uses dual-band networks. This technology allows people to connect their devices through either one of the two channels without any trouble. You can swap between these two whenever you want to depend on your use. The answer is that simple.
Additionally, the service is provided on all the sticks that have come out by Amazon since 2014. This shows that the user does not need to worry about compatibility when connecting their device to the internet. However, you should note that even though the Fire Stick supports both of these channels. The same cannot be said for all of your other devices. You can only configure a 5 GHz channel if your router allows it. On top of this, your other devices also require compatibility with them before you can start using them.
Changing Frequency Channels for Fire Stick
If you are wondering how you can set up the frequency channels for your device then the procedure for it is quite simple. Just make sure that your router can support it beforehand. You can check its specifications to ensure this. Some routers are also equipped with dual-band systems which means that they will run on both frequency bands at the same time.
This takes out the tension of having to switch between the channels from time to time. To set up the service, you will first have to open up the configuration panel of your router. Log into it using your credentials. If you are having trouble then the default ones should be set to ‘admin’. You can then browse through the advanced settings to locate the channels tab. If you have dual-band available then switch it on and start using it.
If you don’t then enter in a channel below the space provided to configure the device. You can check for channels that have 2.4GHz or 5GHz online depending on which one you want to use. Save your changes and reboot the router once. This should then allow you to start using your Fire Stick at your choice of bandwidth frequency. The 5GHz is mostly faster but has a much lower and tighter signal spread.