Is It Possible To Set Apple Airport Express At 5GHz Only?

airport express 5ghz only
airport express 5ghz only

AirPort Express is the base station from Apple that will help you out perfectly to make it work for your Wi-Fi needs. AirPort Express got the right edge of networking as it is a dual-band Wi-Fi base station that will help you out with the 2.4 GHz and 5 GHz frequency bands at the same time.

If you are looking to choose the 5 GHz frequency only on the AirPort Express, you will need to know a few things about it.

Is It Possible To Set Apple Airport Express At 5GHz Only?

Yes, it is possible for you to set the AirPort Express at 5 GHz or 2.4 GHz only and turn off the other one. The AirPort Express allows you a number of options to choose from, and this will totally enhance the experience for you with the Wi-Fi.

These options include setting up both the frequencies at same SSSID and the device you are using will choose the frequency with better signal strength automatically so that you can have a better coverage around the place.

Not only that, but you also have the option to set different SSIDs for each of these frequencies and that will allow you to make sure that you are not missing out on any of the frequency and that you can set it up correctly.

How to set it up?

However, it might not be that easy for you to set it up and it might get a bit complicated for a new user. The basic thing that you will need to know is that like other routers, you cannot simply access the portal by entering an IP address in the browser address bar.

To access the settings for your AirPort Express, you will need to have the AirPort Utility Application installed on your iOS device in order to configure the settings on it.

So, once you open the AirPort utility application, you will need to click on the AirPort Express Icon on it, and then click on the Edit button in top right corner. This will help you out perfectly to access all the configuration and settings that you need to modify. So, here you will need to click on the Wireless Tab and then Go to Wireless Options.

Under the Wireless Options tab, you will be able to find both frequency bands for 2.4 GHz and 5 GHz. You will need to uncheck the 2.4 GHz band and let the 5 GHz band be checked there. After that, you will need to save the settings and restart the AirPort Express once.

This way, you will be able to make sure that only 5 GHz frequency is turned on and that you don’t have to face any problems that you were facing earlier.

You can also choose to rename the SSID here for both of the frequencies and customize the AirPort Express pretty easily so you can choose between the frequencies manually if you wish to do so. There are also lots of other options and configurations that you can play around with pretty easily here.

Leave a Comment