Linksys has a wide range of routers and products that are used all across the world for different sorts of applications. The wide range of Linksys products allows consumers to choose the right router and equipment according to their own choice. While there are so many routers out there, you might feel like they are all the same, but it is not the case. You will have to learn troubleshooting for your specific router that you are using if ceases to work at some point. For Linksys RE3600, here are a few things you need to try.
Linksys RE6300 Not Working
1) Check its connection
While RE3600 is the Wi-Fi extender, it will not work if you don’t have it connected to the Wi-Fi router in the first place. No lights will be turned on and you will feel like the extender is simply without power. What you will need to do is make sure that it is connected to an active output port at the router end and that the same ethernet cable is connected to the extender at the input port. Although, if you are connecting it wirelessly, you will need to check on the connection and make sure that the credentials are in order to have it working.
2) Check on the Power
Another thing that you should try out is to check the power cord and make sure that there are no issues on that part. Not only your power cord should be in perfect health and connected to the extender but it should also be plugged in an outlet that is active and there are no issues on the power outlet. Check on all that and you are most likely to find the culprit here that is going to help you figure out the problem easily and you will not have to worry about it again.
3) Reset Connection
There are certain complications with setting up the Wi-Fi extender so you need to take care of them all. The optimal way is to reset the connection between your router and the extender and that will be the perfect thing to do. So, reset it once and then try setting it up again. You will need to connect a PC with your Wi-Fi and then go to Extender.linksys.com on the browser address bar. Here, you will need to set up the extender using its MAC address and that will make it work perfectly for you.
Moving forward, this will ensure that all the errors are cleared out and that you are able to use the extender without any major problems afterward.
4) Take it to a store
If nothing so far has worked out for you then there is most certainly some error beyond repair and it is most likely that the problem might be hardware. So, you will need to take the extender to a store and get it checked properly. This will help you ensure that any hardware problem on the extender is figured out and they will also be able to fix it for you properly.