Xfinity Wifi Hotspot No IP Address: 3 Ways To Fix

xfinity wifi hotspot no ip address
xfinity wifi hotspot no ip address

Xfinity has become a noticeable and well-reputed name for people who need internet connections. The prime reason for this popularity is that users can use the Wi-Fi hotspots and access internet connection of several devices at a time. With this being said, if you are struggling with “Xfinity Wi-Fi hotspot no IP Address,” we have got the troubleshooting for you. So, have a look!

Xfinity Wifi Hotspot No IP Address

1) Manual Connections

First of all, you need to make sure that you have activated the Xfinity account. You will come across two SSIDs, such as XFINITY and xfinity wifi. The first one is the secure Wi-Fi connection with high-end encryption, and the second one is for public use. Now, you need to connect to Wi-Fi manually by following the below-mentioned steps;

  • First of all, you need to connect to either network by choosing the network from the Wi-Fi settings on the device
  • Now, open the web browser and go to the sign-in page. You can also use the business Comcast official website to be directed to the sign-in page
  • Once the sign-in page opens up, you need to enter the account credentials and hit on the sign-in button
  • This is all you need to do, and the Wi-Fi hotspot will start working seamlessly

2) Removing The MAC Address

When it comes down to the Xfinity Wi-Fi hotspot, you can only connect a specific number of devices. However, if the connected device count increases, it might lead to the no IP address issue. In this case, you need to eliminate the unused devices from the list. In addition, you can remove the MAC address that will enable you to establish an internet connection through a Wi-Fi hotspot. So, follow the below-mentioned steps;

  • Go to the Comcast official website and sign in to your account through the account credentials (you must use the primary account ID)
  • After logging in, move to the section where all the connected devices are listed. You need to remove the devices that are having connection issues
  • Now, click on the remove button with the device, and you will be asked for confirmation. You need to provide the removal confirmation
  • Then, connect to the Xfinity Wi-Fi hotspot again, and the connectivity issue will be taken care of

3) IP Configuration Renewal

When you use the command prompt for removing the IP configuration and renew the configuration again, the no IP address issue will be catered to. With this being said, it is equally effective for dynamic internet protocol configurations. In the section below, we have outlined how to remove the IP configuration by following the below-mentioned steps;

  • Press the Windows and R key at the same time, which will run the dialog box
  • Write CMD in the field and press the shift, enter, and ctrl buttons at the same time
  • Allow confirmation for the administrative privilege
  • A new command prompt will open up, so write, “ipconfig/release”
  • Then, type ipconfig/renew in the new field and hit the enter button

Close the command prompt, and the Wi-Fi hotspot will start working

Leave a Comment

Share via
Copy link