4 Ways To Fix TX-NR609 No Sound Issue

tx-nr609 no sound
tx-nr609 no sound

Onkyo is a Japanese consumer electronics manufacturer that is quite infamous but their products are pretty cool in terms of performance and most of the people who are looking for better performing products would prefer Onkyo oover the other brands.

They specialize in premium home cinema and audio equipment including the AV receivers surround sound speakers and portable devices that will totally be enhancing the audio experience for you like nothing else. Onkyo products are also pretty great with the durability and there are not many problems that you might have to face on them.

TX-NR609 is one such 7.2-Channel network A/V receiver that is too good with the performance. Not only there are many features on it including 3D ready, HDMI interface, DLNA, Dolby Digital surround sound and computability with USB, Windows and iPhones but the sound quality on this receiver is beyond ordinary.

If you are looking for something that can enhance the overall audio experience for you, TX-NR609 is the best investment for that. However, if you are getting no sound from it at all, that might be troublesome for you. A few things that you will need to do in order to make sure that you are getting the right sound on TX-NR609 are:

TX-NR609 No Sound Issue

1) Check Source

There are multiple sources that are supported by TX-NR609 and you need to ensure that you have configured it correctly to make sure that you can enjoy the right sound experience from the receiver that you seek.

In order to do that, you will first have to check that the audio source on the receiver is selected as the same source that you are using for input on the receiver. There is a source button on the front that allows you to toggle between the sources.

Once you have selected the right source, it would be better if you can remove all the other source connections on the receiver and check the content that you are trying to play with the receiver. This will help you out most of the times and you will not have to face any such problems like no sound at all from TX-NR609 afterwards.

2) Check Output

You also need to make sure that you have the output speakers connected with the receiver perfectly. The receiver is just there to enhance and amplify the audio and the speakers are actually creating those sounds for you.

You will need to check on the cables first and make sure that they are connected properly on the output ports of your receiver. After that, you will need to inspect the speaker cables for any sort of damages and that will get you a better idea if there is some problem with the cables.

Lastly, you need to run a check on your speakers as they might have gone bad and you will be left with no audio at all. So, all these checks will help you get a better idea if there is some sort of problems with the speakers instead of the receiver. After that, you can troubleshoot the problem efficiently by fixing the speakers or the receiver appropriately.

3) Reset

Lastly, if you have tried everything above and nothing so far has worked out for you. You might need to reset the TX-RN609 receiver in order to get rid of the problem. The reset is pretty simple and while the receiver is turned on, you will need to hold down the VCR/DVR button and then press the ON/Standby button on it.

You will see “Clear” on the screen and it is the indicator that your TX-NR609 is being reset to the default settings. It will clear out your custom settings and radio presets but this is certainly going to help you in getting rid of all sorts of problems that you might be facing including the no audio output from your receiver.

4) Get it Checked

If nothing so far has worked out for you and you are still unable to get the audio from your receiver. You will need to make sure that you are getting it checked from a certified technician and they will be able to help you out in not only diagnosing the problem but they will also be fixing it for good.

Leave a Comment

Share via
Copy link
Powered by Social Snap