One of the most important things to look out for is having proper routers in your home. These ensure that you get proper signals no matter where you are in your house. If your house is huge then having several routers might be required. Talking about this, the brand you purchase your router from also plays a huge role in how it will work. With that being said, Linksys E3000 is among some of the best routers that can install in your home. While it might be amazing there are also some issues that you can get with it. Talking about this, if you are having trouble resetting your Linksys E3000 then here are some troubleshooting steps that can be used.
Resetting Linksys E3000
1. Soft Reset
The main reason why people would want to reset their Linksys E3000 router is if it is running into problems. There are several reasons why this can happen but it is mostly recommended that you try a soft reset first. Doing a hard reset will remove any changes that you had made to your router which can be quite annoying to deal with.
On the other hand, a soft reset will only reboot your network and clear its cache. This should be enough to fix most problems with the network so that you continue using your internet. The process is quite easy and you can start by removing the power cable from your router.
Now, wait for 50 seconds to a minute before plugging the router back in. Keep in mind that you will have to wait patiently for it to start up as pressing any buttons during the process can cause further problems.
2. Hard Reset
Hard reset is a process that brings a device back to its factory default state. This will completely remove the configurations for your router along with any issues that were on it. The process requires you to first locate a small pin that has to be held inside the router.
The back of your Linksys E3000 should have a small pinhole where you can hold the pin. Keep the button held for about 8 seconds, after which the lights will start blinking. This indicates the router is now being reset and you can now start waiting.
3. Contact Customer Support
Finally, if you are still getting the same problem then one last thing that you can try is resetting your entire network. This requires the soft reset but you have to do this on every single device in your network including your modem.
Once done, you can then check if your internet starts working again or not. If you are still getting the same problem then your only option is to contact the support team for Linksys. Keep in mind that the issue can also be from your ISP which is why you should troubleshoot as well.