NETGEAR is one of the best manufacturers that you can possibly get your hands on for the networking equipment, including those better performing switches, networking adapters, connectors, and a lot more.
Powerline Adapter is one such device from NETGEAR that allows you to have the right networking on your speed, as you can use it for all the network splitting purposes and more. Powerline adapter generally performs well without any errors at all. However, if the powerline adapter is not getting full speed, there might be some things that you will have to check upon.
Powerline Adapter Not Getting Full Speed
1) Run a speed test
The first thing that you will need to do is to make sure that your ISP is providing you the right speed that you are going to need in order to make it work. The problem can be due to the reason that your ISP might have low speed on the network. So, you will need to make sure that you are running a speed test on your device without getting the Powerline adapter attached. This will help you figure out if there are some problems on the ISP.
If the network speed from the ISP is slow, then you will need to contact the ISP and make sure that they are providing you the right speed that you are going to need. However, if you are getting the right speed of internet from your ISP, you will need to move forward with the troubleshooting on your powerline adapter.
2) Power Cycle
So, a power cycle would be enough for you to get the powerline adapter working out perfectly. It is not that hard to manage, and all you will have to do is take off all the cables that you have connected on your adapter. You will also need to take off the power cable and let the adapter rest for a minute or two.
After that, you will need to start with plugging in the power cable first and then plug in both the ethernet cables one by one. After that, you will be able to get the best possible speeds on the Powerline Adapter as you expect. A power cycle will be clearing out all the bugs and errors on your powerline adapter that might be the reason behind this problem.
3) Reset
If running a power cycle has not worked out for you, and you are still getting the slow speed of internet on your network, you might need to reset the NETGEAR powerline adapter to its default settings. That is pretty easy to manage as well, as there is a physical reset button on the NETGEAR powerline adapter.
You need to locate the reset button and keep it pressed for 10-15 seconds. The lights will flash out on your NETGEAR power adapter once, and then they will get stable. Once the lights are stable again, your power adapter will be ready to be used and you will not have to face any sort of slow internet speed problems on your NETGEAR powerline adapter afterward.