NETGEAR R series is one of the best series that comes from NETGEAR and these routers are extremely fast, reliable and durable. Talking about the R7000, it is the best thing that you can get and it is certainly the most reliable thing in the market.
It gets you the best stability and connectivity experience and there are hardly any errors that you might have to worry about. However, if you are facing some problems and the NETGEAR R7000 router keeps disconnecting, you will have to make sure that you can sort it out. A few things that you will need to check upon are:
NETGEAR R7000 Keeps Disconnecting
1) Check with the ISP
First of all, you will need to make sure that the R7000 doesn’t have the problem due to some other problems. So, you will need to check on the internet access that you are getting from the ISP.
That is pretty easy to take care of and you will need to connect the ethernet cable to some PC or laptop with an ethernet port on it to make sure that you are getting the right coverage to ensure that you are getting the right and stable internet coverage from the ISP.
If the coverage is not right and you are facing some problem on the laptop as well, you will need to contact the ISP and ask them for the problem that might be causing you to have this issue. That will certainly be helping you out of the tough corner and you will not need to do anything as well. However, if that doesn’t work for you, you can move forward with the troubleshooting steps.
2) Power Cycle
The next thing that you can try out is to run a power cycle on the router. It is pretty easy as well to take care of, and all you will need to do is take off the power cable from your router and let it rest for a minute or two. After that, you can connect it once again on the R7000 and that will be doing the truck for you.
3) Check Connector
You also need to check on the connector and make sure that it is in the right health. A loose or faulty connector can cause you to have this problem, and it is pretty easy as well to replace the connector as well. So, you will need to make sure that you are replacing the connector with a new one and that will be the best thing for you to ensure that you don’t have to face this sort of problems again.
4) Switch to 2.4 GHz
While the 5 GHz frequency on the R7000 is pretty fast and it can help you out of most of the tight corners. However, it is not that good for the connectivity and if there is a considerable distance between the router and your device that you have connected, that can cause you to have these problems. That is why, you will need to make sure that you are changing that to 2.4 GHz and that will definitely be helping you out perfectly.