NETGEAR is one of the best brands out there that you can use for all the different sorts of networking needs. Their equipment might be a little expensive if you compare it with some other brands, yet they are manufacturing high-performance devices only that are simply amazing with the speed, processing, and all the networking strength that one might expect.
It wouldn’t be an exaggeration to call NETGEAR routers the fastest and most highly equipped out there in the market. RD5400 is one such router from NETGEAR that has 5 GHz Wi-Fi compatibility on it as well. If the 5 GHz is not working for you, here are a few things that you will need to take care of:
Netgear R6400 5GHz Not Working
1) Restart the Router
The first thing that you can possibly do if the router is not working with the 5 GHz frequency is to ensure that you are restarting the router properly once. There can be a temporary error on the router causing this problem for you and you can fix it pretty easily with a simple power cycle.
In order to make that sure, you need to take off the power cord from your NETGEAR RD5400 router and let it sit for a minute or two at least. After that, you can plug in the power cord back and the router will start working with 5 GHz frequency as before without causing any further problems.
2) Enable it
Another thing that you need to know is that you will have to enable the 5GHz frequency on your router in order to make it work. You will need to access the admin settings on your router and make sure that you are enabling the 5 GHz frequency there.
You will also need to configure the settings for 5 GHz frequency on your router. You will need to enable the SSID and it would be better to choose a different SSID than your 2.4 GHz frequency. After that, you can set a different password as well, and save the settings. Once you have saved the settings on your router, you can restart it and that will help you out properly to sort out the issue at hand.
3) Bring it closer
You need to know that 5 GHz frequency is optimally great for the speed, but the signal strength and connectivity is often compromised on the 5 GHz frequency. Especially if there are some walls or other obstacles between the router and your device you are trying to connect with the RD6400 NETGEAR router, that might be a problem causing you to have all these issues with 5 GHz frequency.
That is why, you will need to make sure that you bring the device closer to the router, or install the router in the same room as your device to make the 5 GHz frequency work out as it should. After that, you will not have to deal with any sorts of problems with your 5 GHz frequency on the RD6400 NETGEAR router.