Linksys WRT1900AC Port Forwarding Not Working: 4 Fixes

linksys wrt1900ac port forwarding not working
linksys wrt1900ac port forwarding not working

Linksys is simply one of the best options for you if you are looking to get yourself durable and stable equipment for your home. The best thing is that not only their all the products are pretty good with durability, but the performance aspect has not been neglected either and you receive best performance on these routers that is simply more than anything that you might be expecting.

Moving forward, there are also some value-added features support such as for Port Forwarding that will allow you to use your routers and modems for any application that you might want to. If your Linksys WRT1900AC is having any sorts of issue with the port forwarding, here are a few things that you need to check.

Linksys WRT1900AC Port Forwarding Not Working

1) Check Your IP Address

The first and most important thing that you should know is that Port Forwarding does not work with an ISP that is offering dynamic IP Addresses only. If you are on an ISP that is getting you dynamic IP Addresses only, then that might be the problem that you are facing. To have this issue fixed, you will need to contact your ISP and ask them to get you a static IP Address so that you can use it for port forwarding without having any sorts of issues at all.

The basic thing is that you need a static IP so that you can assign a specific IP to the port that you are going to use for Port Forwarding. Otherwise, it will keep changing for you and the whole thing will crash down.

2) Check for Bridge Mode

Another thing that you possibly need to check as it can be troublesome is the Bridge mode. While you are at it. A bridge mode is simply opposite to the port forwarding and you will not be able to use them both together. So, if you already have Bridge mode enabled on your router, then you will have to turn it off in order to setup, optimize and use the port forwarding. If you are setting up the port forwarding, then you will know how you can access the bridge mode in advanced settings and disable it completely so that you will not have to face any issues with the port forwarding.

3) Reset the Router

If you see that Bridge Mode is enabled and you are unable to find a way around it, then you will need to reset the router to its default settings and then try setting up the port forwarding again. This will make it work for you optimally and you will be able to get the port forwarding up and running in no time at all.

4) Update the Firmware

If you have tried everything and you are certain that you are setting up everything right, then you will need to check on the Firmware as well. You need to have the latest version of firmware installed on your router and getting it will make sure that you are able to use the Port Forwarding.

Leave a Comment

Share via
Copy link
Powered by Social Snap