3 Ways To Fix iPhone Won’t Connect To Netgear Router

iphone wont connect to netgear router
iphone wont connect to netgear router

Most people use wireless connections in their homes. This is because of them being easy to set up as well as them requiring no cables. Considering this, your house will look extremely clean but there are some downsides as well. These include the speed of your connection being slower while you are using Wi-Fi services. This is why people recommend using ethernet cables over wireless connections.

Although, devices like mobile phones have no other option than choosing wireless connectivity. Luckily, there are some things that you can do to speed your network or fix the issues you were getting. Recently some users have reported that their iPhone won’t connect to their Netgear router. If you are also getting the same issue then here are some simple steps that should help you in getting rid of it.

How to Fix iPhone Won’t Connect To Netgear Router?

  1. Use WPA Service

Sometimes your iPhone having trouble trying to connect with your router can be an issue with the configurations. There are some network types that these mobiles cannot connect to. Considering this, you can change the configurations to fix your problem. You can start by rebooting your modem and connecting it to your router through an ethernet cable.

Once your device becomes stable again, you will have to access your computer to change the configurations. Use the network tab on it to access the Netgear control panel. You can then go through all the settings to find the security tab.

Select WPA mode here as this is the best for having a secured network. You can then set an SSID on the option below. If you are having trouble with this then you can search online to find some keys that can be used. These should normally be unique values. Finally, enter a password in the passphrase tab and make sure that you click on save.

  1. Check Routers Location

The second thing that you should be checking is the location you have installed your router in. Most iPhone models are known for having a lower signal catching strength than android phones or other devices. Keeping this in mind, you might be getting a low signal that can prevent you from connecting to your network.

You can either try moving around stuff around your router that might be blocking the signals. Alternatively, you can install your router in a place where you usually want to use your mobile. This will ensure that you get the best possible signals and that your network does not get any further issues.

  1. Check Password

Finally, if you are still unable to connect to your Netgear router. Then one reason can be that you are trying to enter the wrong credentials. Make sure that the password you are entering is accurate. These are also case sensitive so keep that in mind when signing in.

If the problem persists then check your connection on another device. You can then contact your ISP and tell them about your issue in detail. This is because the problem might be from their backend instead of your devices.

Leave a Comment

Share via
Copy link
Powered by Social Snap