If you enjoy watching the news or live sports games then you most likely own a cable service. These can be used to get access to a list of different channels on your television. Additionally, most cable boxes come with a lot of features installed into them. These are mainly used to keep their users at ease. One such feature is the ability to record any show that you want. These can then be watched by the user at any given time without any limit.
Although, one thing to consider while recording these shows is that you have enough storage available to record them. Talking about cable boxes, these devices give people access to different channels by receiving signals through the service providers. There are a bunch of different formats that can be used to change the method of receiving these signals. Although these can be selected depending on the area you might be living in.
Upstream Power
Most cable boxes use upstream power as a method of confirmation for the signals they are receiving from the backend. Keeping a note on this helps the device maintain its cable. Aside from this, there are two other signal levels that these cable boxes keep reading of, these include downstream power as well as SNR.
Why Would You Need to Increase It?
Usually having a low upstream level is a good thing. It means that your device is receiving the best possible signals that it can from the satellites and towers. However, if you start to notice any problems with the channels then that is most likely due to interference from other sources. This makes it difficult for the device to receive signals coming from the towers. One simple way to fix this is by increasing the upstream power level on your cable modem.
How To Increase Upstream Power Level?
First of all, you need to keep in mind that you should only increase the upstream level if you are getting any problems with your cable. Furthermore, you should not increase your upstream power level by a lot, this is because increasing the upstream level makes it difficult for other devices near you to catch signals. To get the upstream level changed, you can contact the service providers that you are using. Most companies control the levels of these signals remotely. If you try to change these settings manually, then they might end up cutting off your service.
This is why it is best that you contact the company and tell them about your problem. They should be able to change the upstream power level for you so that you can get a good signal strength again. Aside from this, if you are still getting the same problem then the issue might be in your modem device instead. If you are using an older version, then you should try to get it replaced with a new one as soon as possible. You can easily search a list of good cable boxes and modems online.