Google is a well-known name in the industry and they have recently started designing internet devices and Google Wi-Fi Mesh router is one of them. One Wi-Fi point of this device is enough to handle over 200 devices and can be used to stream 4K videos without any errors. In simpler words, it can blanket your entire space without any dropouts. However, some users have been complaining about the weak mesh, and with this article, we are listing down some solutions that you can try out!
Google Wi-Fi Weak Mesh Fix
Distance is one of the most common yet underrated culprits of internet issues and the same goes for your mesh network. The mesh network becomes weak when the mesh point and the router are placed too far away from each other. According to Google, the distance of more than one room can cause a weak connection. For this reason, we recommend that you put the router and mesh point closer to each other to make sure the mesh network works smoothly.
The second most common reason behind a weak mesh network is interference. For instance, if you have connected too many wireless devices around the mesh point, it will interfere with the signals, hence weak mesh. For this reason, it’s recommended that you reduce the number of wireless devices around the mesh point and reboot it to see if it improves the internet speed. In addition to the wireless devices, you’ve to ensure that there aren’t many walls between the mesh point and router because it can hinder the flow of internet signals.
In some cases, the mesh network becomes weak because you have subscribed to the internet plan with sufficient bandwidth. For instance, if you tend to stream 4K content and download large files, you have to subscribe to an internet plan with at least 100Mbps bandwidth. So, if the internet plan provides any less bandwidth, it’s time you upgrade the internet plan. On the other hand, if you already have a reliable plan but the mesh network is still weak, there are chances that the internet service provider has throttled the speed, which usually happens at the end of the month. If that’s the case, you’ve to contact the internet service provider.
If bandwidth isn’t the issue, there are chances that your mesh network is operating on the 2.4GHz band. That’s because this wireless band is commonly used and causes issues with the speed. So, it’s recommended that you sign in to the network and change the wireless band to 5GHz – this band has low traffic, which translates into a better speed.
- Disconnect The Devices
Many people think that once they lock the devices, it stops using the internet but smart devices, such as laptops and smartphones, keep using the internet in the background, which can lead to weak connection. So, if you have connected some devices to the internet but aren’t using them, it’s best that you turn off Wi-Fi on these devices to limit bandwidth consumption.