In this age, having access to a network connection is important. This is because the internet is connecting everyone with each other. However, some users are complaining about “full_ford computer on my network.” This can be extremely bothering, and we are sharing what can be done about it!
Full_Ford Computer On My Network
WPS
When it comes down to internet connections, threats, and intruding devices, the users have to consider the Wi-Fi-protected setup. It was basically designed to make it easier for users to connect new devices. However, it can cause vulnerability on the Wi-Fi network and leads to security risks. So, if you have the full_ford computer on your network, we suggest that you disable WPS on the network. In this section, we are sharing instructions on how to disable WPS on your Wi-Fi connection, such as;
- First of all, you have to log in to the internet router through your username and password (the login credentials)
- Once you are logged in, open the advanced settings and tap on the wireless menu
- From the wireless menu, click on the WPS option
- Now, you have to toggle off WPS
When the WPS has switched off the network, there will not be any vulnerability on the network. As a result, the intruding devices will disappear.
SSID Broadcasting
SSID broadcasting is responsible for how the router is transmitting the name around the devices. It is responsible for making the network visible and accessible. In case you have the full_ford computer on the network, you might try disabling the SSID broadcasting on the Wi-Fi network. In the section below, you can find the instructions for disabling SSID broadcasting, such as;
- In the first step, you have sign into the Wi-Fi connection from the router (you can use the login credentials)
- Once you are logged in, go to the settings and open the advanced tab
- From the advanced tab, scroll down to SSID broadcasting and switch it off
- Once switched off, press the save settings
Now that you’ve saved the settings, you will be protected from cyberattacks. On the other hand, the instructions will differ with every Wi-Fi router, so you can contact the router manufacturer.
Reset The Router
In case you are feeling that the full_ford computer is appearing on the network because of security compromises, you can try resetting the router settings and configurations. This is because the router reset will change all settings to default. Before you reset the router, it is better to just write down the network settings and configuration because you will need to set them up again.
Coming to the point, you can reset the router by locating the reset button on the router. When you identify the reset button, press it for ten seconds or until the router reboots. After the reset, enter the settings and see if full_ford appears on the network. If the third-party device is no longer on the network, you are good to go. However, if it’s still appearing on the network, why don’t you call your internet service provider?