Actiontec is one of the most widely used brands by people who need routers and modems. They have actually launched an extensive range of modems and routers for catering to different people and their internet plans. It’s essential to note down that specific modems or routers are needed for supporting some internet speeds. That’s the prime reason people are struggling with the Actiontec model MI424WR Rev 1 required for speeds of 150 Mbps & higher issue. So, let’s have a look at the troubleshooting methods!
Actiontec Model MI424WR Rev 1 Required For Speeds Of 150 Mbps & Higher
1) Choose The Right Modem
When it comes down to this error, keep in mind that you might not be using the right modem after all. For instance, this modem is designed to support internet speed up to 1Gbps, which means you will need to invest in Actiontec MI424WR Rev 1 for supporting the internet speed of 150Mbps or higher. In addition, this modem can support the 300Mbps wireless connection, so if there is such an error, just opt for this modem, and the internet speed will be supported.
In case you are already using a suitable modem, and the error still incurs, you need to check the cables. This is because the cables are responsible for transmitting the internet signals. So, if the cables are damaged, the signal transmission will be impacted, and the internet speed will not be supported. For this purpose, we suggest that you change the cables, such as ethernet and coax cables. Once you start using the right cables, the internet transmission will be streamlined. As a result, the internet speed will be supported.
If the error still persists, but you cannot opt for Actiontec, you can opt for other modems. However, whichever modem or router you use, make sure that it has been integrated with the 802.11n wireless chipset. It will make sure that the internet speed is supported by the modem and router. In addition, the modems with 802.11n wireless chipset will ensure that they can cater to multiple bandwidths of the internet. So, just try to replace the modem with a suitable chipset.
Truth be told, the reset can handle the majority of issues, inclusive of the internet connectivity and internet speed support issues. For this reason, you need to reset the modem or router. In case you don’t know how to reset the modem, look for the reset button. The reset button is usually too small, so you will need to press it with a paper clip or needle. Keep in mind that the reset button has to be pressed for ten seconds to ensure the modem is reset. When the reset is complete, switch on the modem and try connecting to the internet again.
It wouldn’t be wrong to say that reset is the next-level troubleshooting method, so it’s best to reboot the modem before resetting. In that case, disconnect the power of the modem and wait for a few minutes (ten to fifteen minutes). When the power is connected again, we are pretty sure that the internet speed will be supported.