The virtual private network is defined as the security measure which is configured on the VPN routers to secure the internet connection and the data that’s transmitted through the network. This is because it encrypts the data, and if you want to set up a VPN on your Linksys Velop, we have all the instructions that you must follow!
How To Setup VPN On Linksys Velop
When it comes down to the connecting VPN on your Linksys Velop router, you will need to verify the VPN settings and establish a connection. Before you connect Linksys Velop to the VPN, you need to have a stable internet connection. Once the internet connection has been established, follow the below-mentioned instructions;
- Access the web-based setup page of your router by using the MAC address mentioned on the router’s back
- When the page opens up, tap on the VPN option and choose the “gateway to gateway” option
- Check the VPN settings and make sure they are configured properly. Keep in mind that the IP address mentioned under the group type will be the local IP address of your router, while the IP mentioned under the gateway type is the WAN address. You should ensure that the authentication and encryption tabs have the same settings, and don’t forget to enable the perfect forward security option. Lastly, the SA Life Time must be the same on both VPN tunnels
- Then, tap on summary and then click
Unable To Setup VPN On Linksys Velop
It goes without saying that setting up the VPN is a reliable decision as you will be able to enhance the security and encryption standards of the internet connection. However, if you are having a hard time setting up the VPN on your Velop router, let’s see what can be done about it;
- First of all, you need to ensure that the VPN pass-through feature is enabled on the Linksys router. You can select it through the router settings, and if it’s disabled, just toggle the option to turn it on
- You must put your Linksys Velop in the gateway mode to make sure it can configure the VPN settings. In addition to this, the WAN requests must be blocked to prevent connectivity errors
- Turn off the third-party antivirus apps and built-in firewall of your system to make sure there are no conflicts with the VPN that are causing setup errors
- Make sure that your device is connected to a high-speed internet connection. In simpler words, the router must be connected to an active internet connection. For this purpose, you can try connecting some other device to the internet connection, and if it’s not working, you need to troubleshoot your internet connection for the VPN to work properly
- Call your internet service provider to determine the potential issues behind the in-configurable setting
It’s safe to say that setting up the VPN will surely help create a secure internet connection with the router. However, if you are having issues configuring the VPN settings, you should call Linksys technical support team to get help with setup.