We are getting some of the most advanced routers out there with each day, and they are loaded with tons of features that will totally enhance the experience for you.
These features allow you an extended range of control over the wireless routers and the network and you will be able to ensure that you are using your Internet and the Wi-Fi network through your router precisely as you want to without getting yourself into any sorts of troubles at all.
Limiting the internet speed on the router is one such feature that allows you to control how much speed each device or the whole network can get from the ISP.
A few things that you must know about it are:
How To Activate Router Limiting Speed Feature?
Is it Possible?
Yes, it is quite possible and you don’t have to do much in order to make it certain. The only thing that you need to know about is that it is a feature that might not be available on all the routers that are available out there in the market.
You will have to check on the router that you are using if it allows that feature to access it on the router admin panel. Not only that, but you will also need to be vigilant about the firmware that you are using on your router.
Sometimes, the feature might be available on the router that you are using, but you will need to update the firmware to have access to it. That is why, it would be best if you contact the OEM for your router or check for the specs online to make sure that you have the accurate information in making it work for you.
Once you have made that sure that your router has this feature and that your firmware that you are currently using on the router supports it as well, here is how you can manage it.
How to Achieve this?
The next thing that you will need to know about is how you can achieve it, and it is not that complicated either. All you will have to do is access the router admin panel by entering the router’s IP Address in the address bar of your browser.
This will take you to the page where you will have to enter the credentials to access the router and all the settings on it. Once you are able to successfully login the router Admin Panel, you will need to click on the Devices menu.
Under the devices menu, you will be able to locate all the devices that are connected to your router with the information about how much speed each device is taking, their IP Addresses and MAC Addresses as well.
You can set the limit for speed for each device separately, or you have the option on some routers to limit a set speed for all the devices that are connected on your router and that will ensure you to have speed limit enabled after you save the settings and restart your router.