For everyone who uses the internet, choosing the right modem and router is an absolute necessity. That’s to say because these devices transmit the wireless signals to the devices, connecting you to the internet. In the same way, some of these users are bothered by the arris cm820 link light flashing and they cannot figure out what this is all about. So, in this article, we are sharing every bit of information about it!
Arris CM820 Link Light Flashing: What Does It Mean?
In case you want to know the root cause behind the flashing light, it suspects that the internet and network connection to the internet service provider has failed. There can be multiple reasons for it, such as a faulty router or worn-out cables. However, you don’t have to worry because we’ve lined out the troubleshooting methods for you!
1) Reboot
Your first step should be giving a fresh start to the router because it can solve the majority of issues. For the most part, the router reboot will make sure that your device gets fresh and new signals since it helps create a better connection. For rebooting the router, take out the power cord from the power socket and wait for a minute. After a minute, just plug in the power cord again and the router will be able to establish a connection.
2) Cables
In the majority of cases, the router is unable to establish a connection with the ISP because the cables are not working properly. With this being said, you need to thoroughly inspect the cables around the modem and router. If you see any physical damages and fraying, replace the cables. However, if nothing is visible, we suggest that you check the electric current continuity with the multimeter. So, in case you suspect any of these issues with the cable, just replace with the new ones and your internet will be back on track!
3) Cable Types
Sure, the cable is getting the proper current continuity and there are no physical damages or fraying, but did you pay attention to which types of cables are you using? We are saying this because Arris suggests using the coaxial cables and create the entire connection through it. These cables are designed to transmit such signals without impacting the connection. So, choose the coaxial cables and make sure to buy from the reputed brand!
4) Broadband Wire
If you want to do something simple that helps get rid of the blinking light, we suggest checking the broadband wire. With this being said, you need to take out the broadband wire from the router and switch off the router. After two minutes, plug in the broadband wire and switch on the router. Once the router is fully switched on, the blinking light will be fixed and the internet connection will be streamlined.
5) Call Arris
Well, if the troubleshooting methods aren’t fixing up the issue for you, there might be something wrong with the router’s hardware. With this being said, just call Arris and ask them for the router replacement!