Raspberry Pi WiFi Greyed Out: 3 Ways To Fix

raspberry pi wifi greyed out
raspberry pi wifi greyed out

Raspberry Pi is a small chip manufactured by the company. There are no special requirements for users to access the service provided by this chip and you can use a standard keyboard and mouse to control it.

The device was originally designed to allow programmers to access applications where they can learn these easily. But you can now use a list of other software on them easily. While these might be a great option for people on a tight budget.

You should note that there are still some problems that you can run into on these. One issue is the Wi-Fi tab being greyed out on the Raspberry Pi. We will be using this article to provide you with some simple steps to fix this issue.

Raspberry Pi WiFi Greyed Out

  1. Error in Configuration Files

The most common reason why people get their Wi-Fi tabs greyed out is that there might a problem in their configuration files. You should note that the Raspberry Pi requires people to set up a list of files before they can proceed with using its services. However, if there is even one single mistake in these files then you will be unable to access certain features.

Additionally, the WPA2 Enterprise does not support the GUI used by some network connections. For both these, cases you will have to configure the file setup again and ensure that there is no problem with it. You can manually modify the networking options to fill in the details about your connection.

This should fix your problem and you should now be able to connect to your internet without any further error messages. One thing to remember is that it is better that you type in all of the information. This is because there might be some changes in certain special letters when you copy and paste these files. Which can cause you to get more problems instead of fixing the previous ones.

  1. Reboot System

If you are still getting the same problem, then you should note that the Raspberry Pi requires you to reboot your device after making certain changes to it. If you have not done this then that might be the reason why you are still getting the same problem.

Give your system a restart but make sure that you keep it switched off for several minutes. This gives the chip enough time to replace files and clear up any temporary cache files that might be stored on it.

  1. Contact Forums or Support

Sometimes the problem might not get fixed from these solutions. There are a lot of configuration files on the Raspberry Pi which makes it difficult to pinpoint the solution for you. Although, this is why many forums can be contacted.

You will be required to give the details of your problem here. Which will then be read by people which can provide you with solutions. Identifying the error in your files on your own can be annoying.

Leave a Comment