NETGEAR routers are pretty fast and there are hardly any problems that you will come across if you are using them for any sort of applications you might have planned for. NETGEAR routers are the best thing and they are pretty fast when it comes to performance and internet speed.
You also get to enjoy the modem and router all in a single device as there are 4 ethernet ports on the router as well and we all know that the ethernet is a tad bit faster than the Wi-Fi speed. However, if you are feeling a considerable difference between the router and modem then that is quite a problem that you will need to solve, and here is what you will need to do.
How to Fix Netgear Router Slower Than Modem?
1. Restart Router
The first thing that you need to try out is restarting the router as there might be some problems like fragmentation, too much load of traffic, or multiple similar reasons on your router that you will need to have fixed and a power cycle is the best way to go around them.
In order to get that sorted out, you will need to unplug the router from power for a minute or two and let it sit like that. After that, you can plug in the router back and that will optimally be solving the problem for you.
2. Check Bandwidth Allocation
There is also a feature on NETGEAR routers and modems that allow you to allocate bandwidth and resources to a certain feature and you will need to be careful about it.
To make it sure, you will need to check on the bandwidth allocation and remove the limits if there are any from the Wi-Fi to ensure that you don’t have to worry about your router performing slower than the modem.
Once you get that sorted out, you will need to save the settings and restart your modem once in order for it to work out for you.
3. Shift the Band
You might be on the 2.4GHz band and that is comparatively slower than the 5 GHz frequency band on your router. So, you will need to check on that and make sure that you are switching the Wi-Fi to 5 GHz frequency band and that will definitely be speeding up the router and Wi-Fi connection for you and you can enjoy the right speed that you might be seeking for any sort of internet access applications that you can possibly have on your mind.
4. Rest the Router
Lastly, if you are unable to figure out the solution for this problem and you have tried all the troubleshooting steps listed above. There are hardly any choices left but to reset your router in order to get rid of any configurations or settings that might be causing you to face this problem.
All you will need to do is reset the router properly using the reset button on the back of your router and then configure the settings on it again in order to make it work and that will definitely be helping you out of all the tight corners with the speed.