NETGEAR is one of the flagship networking equipment manufacturers that allows you to enjoy the right speed, performance, and of course better coverage on all the devices that you intend on using. NETGEAR R8000 is one such tri-band router that offers the best performance and networking speed that is available on the routers available for usage.
However, if you are unable to get the right speed on your router, it can be causing you to have some troubles and you will need to make sure that you are fixing that properly to enjoy a better experience. A few things that you will have to check on are:
Netgear R8000 Router Not Getting Full Speed
1. Check ISP
The first thing that you will have to check if you are unable to get the NETGEAR R8000 is not getting full speed is the speed that you are getting from your ISP.
It might be the reason, and the best way to get it sorted out is to take off the Ethernet cable from your NETGEAR R8000 router and plug it directly on some device that can take the Ethernet cable. After that, you will need to run a speed test to ensure that you are getting the right speed from your ISP.
If the speed is not right, you will need to contact your ISP and ask them to help you with any problems that might be stopping you from getting the right internet speed on your NETGEAR Router. However, if you are getting the right speed, you will need to proceed with the troubleshooting steps.
2. Power Cycle
You need to understand that the router you are using from NETGEAR might get fragmented, or it can have different bugs or errors on it that might be causing you this problem. So, in order to have such issues fixed, you will need to run a power cycle on your router once.
It is pretty simple and all you will need to do is, take out ethernet, power cable and all the other cords that might be connected to your router. After that, let the router sit for a minute or two and then plug all the cables back properly.
This will reboot the router properly and you will be able to clear out any errors that might have been causing you to not get the full speed of internet on your NETGEAR R8000 router.
3. Reset
There are tons of settings on the router that might be causing you to have this problem, such as bandwidth limitation and multiple other settings are there. You will need to make sure that you are checking for all such settings and make sure that they are not causing you to have such problems with the speed on your NETGEAR router.
However, the best way would be to reset your router to default settings. This will reset all your router settings to default and you will need to make sure that you are configuring the SSID and all the encryptions again. However, it will be worth the efforts as this will surely clear out the problem for you.