Netgear is a leading company when we check out the wireless networking industry and has become a top choice for users who need high-quality devices to set up and extend their wireless connections. Similarly, Netgear Powerline 2000 is one of the best adapter kits designed by the company that helps extend the wired as well as wireless internet connection. However, if there is Netgear Powerline 2000 middle light red issue, we have an array of solutions that can be tried!
What You Should Do If The Middle Light Is Red On Netgear Powerline 2000
When the middle LED indicator starts glowing in red color, it means that the link rate is less than 50Mbps. When the link rate ranges from 50Mbps to 60Mbps, the LED indicator will be orange, while the internet speed over 80Mbps will result in green color. So, let’s see how you can improve the link rate or internet speed from 50Mbps!
First of all, you must connect the powerline adapter directly to the electrical outlet rather than using extension cords because they can interfere with the connectivity. Since the powerline adapters depend on electricity to work, which electrical outlet you are using plays an important role. So, if you are using the extension cord and surge protectors, disconnect them and connect your Netgear Powerline 2000 adapter to the outlet directly. On the other hand, if you really have to use an extension cord, invest in a PLC extension cord.
2. Choose A New Outlet
If changing the connection hasn’t turned the red light into green light, it is recommended that you connect the powerline adapter to a different electrical outlet. This is because the new outlet is likely to have better internet signals, resulting in a smooth, fast, and uninterrupted connection. In addition to choosing a new electrical outlet, make sure that all the powerline adapters are installed in the same room because it improves the link rate.
The signal interference is one of the most common culprits behind the red light, and honestly, it can be hard to determine which device is causing the interference. So, if you have connected the powerline adapters to an electrical outlet where you have connected other electronic devices as well, you should disconnect all the other devices and use the outlet for an adapter only. In addition to this, make sure there are no microwaves or smartphone chargers turned on around the adapter as it causes signal interference.
Another solution is to revert the powerline adapter to the factory default settings. For a successful factory reset, you must connect the adapter to a working power outlet (there must be no extension cords and surge protectors). Then, press the reset button with the help of a pen or paperclip for two seconds, and the factory default settings will be brought in. As a result, the adapter will reboot automatically, leading to better connectivity.
The Bottom Line
If you have tried all these solutions, but the red light is still there, there could be some hardware issues that are impacting the performance. So, hire a technician or call Netgear’s technical team for more assistance.