NetGear Powerline 1000 might sound like it is a cable or chord, but in fact, this is a Wi-Fi Extender. With other extenders having limited capacities to only amplify the wireless signals, this one does not only extend the range for the Wi-Fi but also adds to the speed and stable connectivity.
That is why NetGear Powerline 1000 is being used for multiple applications in homes, offices, and all the other places that are hard to list here. It is easy to setup and you will not have to deal with much mess. Although, if it is not connecting, here are a few things you need to check.
Netgear Powerline 1000 Not Connecting
1) Check for the Power
NetGear Powerline 1000 has the right dynamics and it simply plugs into any electrical outlet you might have. You just need to make sure that the outlet is getting uninterrupted power supply on the NetGear Powerline. So, check for the switch and make sure that it is on and the outlet is working fine.
It is recommended to use the NetGear Powerline 1000 on the outlets that don’t have a switch connected to them for better optimization and more stable network connectivity.
2) Check Router Settings
Once you have made sure that everything is fine on the Wi-Fi extender and that the power supply is continuous and stable, you will need to step up and make sure that all the settings on your Wi-Fi routers are fine as well.
To start with, you will need to ensure that your router is at 2.4Ghz frequency and not on the 5Ghz frequency to make sure that it is able to connect with the extender since more coverage and stable connectivity is the goal here. A nominal difference between the speeds might be there, but 5Ghz would not support the Powerline 1000 and you will not be able to connect it.
Also, you will need to disable any firewalls on the router and check on the MAC filtering as well. Make sure that there are no such settings enabled that might be stopping the NetGear Powerline 1000 to be connected over the Wi-Fi network and you will not be able to use it as such.
3) Get NetGear Genie
If you are still unable to make it work, then you should download and install the NetGear Genie application on your device to make it work. The application will be pointing out all the settings or errors that might be causing you to have this issue and face trouble. Once you have pointed out the issue through the NetGear Genie application, it will become a whole lot easier for you to fix the problem and you will be able to make it work.
The application will point you to all the settings that might need optimization or any other issues that you need to look at so you can precisely get the troubleshooting steps and make sure that you are not messing up something that is working fine and doesn’t need fixing.