When it comes to diagnosing a problem, the LED panel of the LB1120 Netgear modem is quite functional. You can easily identify errors on your device by observing specific LED light behaviors. However, it appears that returning these lights to their normal colors can be frustrating at times.
Users have expressed concern about the Netgear LB1120 orange power light. An orange light could indicate incorrect APN settings, hardware issues, or a network issue with your modem, but let’s take a closer look at each of them. So, if you’re looking for a solution to this problem, look no further.
Fixing Netgear LB1120 Orange Power Light:
- Reset Your Modem:
Resetting a modem to factory defaults may appear to be a simple troubleshooting step, but it works wonders in resolving technical issues of this nature. Because hardware issues can occur for a variety of reasons, a factory reset can easily resolve them if they are caused by configuration issues with your modem. However, a reset would improve these uncertain issues, so it is best to begin here.
On the back panel of your modem, look for a factory reset button. Press the button with a paperclip. Hold the button for about 15-20 seconds before releasing it. Allow your modem to restart. Check to see if the orange light has gone away after the modem has stabilized.
- Check Your Nano SIM Card:
In the majority of cases. When your modem displays an orange light, it is connected to the mobile network but is not operational. It could be a problem with your SIM card insertion. Check to see if the SIM card you’re using is supported by the Netgear LB1120. Then, at the back of your modem, check the SIM slot and reinsert it. It’s possible that your SIM card isn’t properly inserted, which is causing the problem. Check to see if your SIM is defective, and if so, try inserting a new SIM card and seeing if the power light returns to its normal state.
- Check Your APN Settings:
The LB1120 is a 4G LTE modem that must be connected to your devices via your carrier network. As a result, it should not be overlooked that your device should be configured with an APN to connect to the network. Incorrect credentials can cause problems with your router’s performance or hardware. So, contact your provider to confirm your device’s APN information.
- Contact Netgear Support:
It is possible that your modem is experiencing a hardware malfunction or that the component is defective. However, make certain that you have exhausted all possible troubleshooting techniques. If nothing seems to be working, you can contact Netgear support and explain your problem. They can provide you with a more professional perspective on the situation, which may assist you in resolving your problem. You can also request that your modem be replaced.