You should get a Wi-Fi extender if you’re seeking a solution to your common Wi-Fi troubles or if you’re having trouble with Wi-Fi coverage across your home. There are several solutions on the market, each with a different Internet speed. A well-known product with a tonne of capabilities that offers the best value for the money is the Netgear Powerline Extender solution. We’re going to go over the procedures on how to use the Netgear Powerline 1000 model because it will deliver roughly 1Gbps speed, making it the finest extender for someone with high-speed internet installed in their house. So, let’s get going.
How To Use The Netgear Powerline 1000
Some of the greatest and most practical features are built into the Netgear Powerline 1000. Features like Plug & Play, very fast internet speeds of up to 1000 Mbps, Energy Saving, and a security function that encrypts the powerline between the two devices are just a few examples. A quick start guide, two Adapters, and two Ethernet cables are often included in the packing.
Here are a few simple steps for configuring a Netgear Powerline 1000.
- Connect the Ethernet cable to the first adapter, then connect one end of it to a power outlet close to your router and the other end to your router.
- The adapter’s lights will now start to illuminate, but you must wait until the Pickup Plug LEDs light up before continuing.
- To activate the Wi-Fi, just put the second device into a wall socket anywhere you think it’s needed after they turn solid green.
- After you have turned on the second device, watch for the Pickup and Plug LEDs to become green.
- The security button, which is next to the factory reset button under the adapters, has to be pressed and held for around 4 seconds. Blinking will begin.
- Go to the first device and continue to hold the security button there for a similar amount of time as you did with the second one.
- Be mindful of the time and keep an eye on your clock since there is a two-minute opportunity to set up a secure network between the two devices.
- As soon as the connection is made, the LED will turn entirely green, signaling that everything is in working order.
- Now, you can do whatever with the 2nd device, it’s up to you whether you’re going to use your 2nd device as a Wi-Fi extender or just use it to connect another Ethernet cable and plug that into your Gaming PC, Consoles, or a Streaming TV.
The pros of having this adapter are that you’re free to use whatever you want as it’s compatible with almost all the devices and provides the best bang for the buck
Using the Netgear Powerline 1000 as a Wi-Fi Extender
You’ll just have to press a WPS button on your router and then press and hold the security button on your 2nd device. It’ll connect within a few seconds.
Conclusion
The primary use of this adapter is to extend the Wi-Fi coverage in hard-to-reach areas of your house. Configuring It up is just as easy as one might think. However, if you don’t have a fast internet connection, it is not worthwhile to invest money in this gadget to acquire the extra function. The previously available models are adequate.