How To Change Hargray Wi-Fi Password (In 8 Steps)

hargray change wifi password
hargray change wifi password

Have you ever noticed a sudden drop in Wi-Fi speeds or noticed that your devices frequently disconnect from your Wi-Fi? These issues aren’t always as simple as they appear. It’s possible that this is why your neighbors are accessing your Wi-Fi without your knowledge. This happens when your Wi-Fi password is too weak or you haven’t changed it in a long time. Therefore it is important to keep your connection secure by changing your Wi-Fi credentials. In case you are wondering how to change your Hargray Wi-Fi password, this article will get you through this.

Hargray Change Wi-Fi Password

You should change your Wi-Fi ID and password on a regular basis to keep your connection secure. This protects you from privacy breaches by preventing your signal from being shared with your neighbors. As a result, ignoring this issue may leave you vulnerable to hackers and internet privacy concerns.

If you want to customize your Hargray password to meet your specific needs, we’ll walk you through the process step by step. The following steps can be used to change the password for Hargray Wi-Fi.

  1. Go to your internet web browser and type in the default IP URL in your search bar.
  2. Type in the default credentials of Hargray and click OK.
  3. The default password for Hargray is ‘admin’.
  4. After that you have entered your login credentials, navigate to the Administration tab.
  5. You will find a Password tab.
  6. Enter your new password.
  7. Re-enter your new password to confirm.
  8. Click the Save Settings tab and now you have successfully configured your Wi-Fi password.

It is also advised to change the SSID of your router so that your privacy and connection speed are not compromised. This is an additional step but it is recommended if you are trying to add extra security to your internet connection. Changing your SSID people cannot tell from where your signals are originating from, therefore to configure your SSID:

  1. Navigate to the Wireless setup tab.
  2. You will see an SSID field.
  3. Delete the Linksys from the field and create your SSID. Make sure that you choose something that you can easily remember.
  4. Once you have entered the SSID click the save settings to save the changes.

By doing this, your devices will disconnect from the previously configured Wi-Fi settings. Now that you have protected your Wi-Fi, make sure that you re-connect your devices again on the Wi-Fi using the new password. Wi-Fi credentials configuration is an extremely important step and should be done once in a while.

Sometimes when you buy a new router there is a possibility that your router has no password protection at all which makes you vulnerable to certain security breaches. Hargray allows you to easily set up your Wi-Fi according to your requirements using a very simple and user-friendly interface. So the next time you experience a sudden drop in your internet connection, it might be a reminder to change your Wi-Fi password.

Leave a Comment