Linksys is not making some of the best ethernet modems, routers, and other similar devices that can help you optimize a network properly at your place, but they also have a wide range of other networking options that will make it a truly blissful experience for you with the Linksys.
Their ethernet switches are such devices that make it possible for you to share the internet without having to lose speed or network stability. Linksys Gigabit Switches are truly high performing with their wide range of options such as regulating port speeds and an interactive GUI module to control it all. If the switch is not working for some reason. Here is what you will need to do.
How To Fix Linksys Switch Not Working?
1. Reset the Switch
The first thing that you should try out is to reset the switch if it is not working for some reason. Resetting is not that difficult and you will never have to worry much about it. All you will need to do to reset the Linksys Switch is to simply plug out the power cord from the switch and then plug it back in after waiting for 10-15 seconds. This is going to make it work perfectly for you and if there are any temporary error or bugs that might be on your Linksys Switch will be cleared out for good.
2. Check the Wires
Another possible reason for the switch not work is that the wires that are connected to it might have developed a short circuit on them or they might be damaged. This is the second major cause that can cause you to face the issues with your Linksys switch and it will simply not work. So, in order to get that fixed up, you should check on all the cables and wires that are attached to the Linksys switch and make sure that they are in perfect order.
You should make sure that none of the wires and cables attached should be damaged and they should not be touching each other in any way that can cause a short circuit and as a result, your Linksys switch will stop working.
3. Check the Power Outlet
If nothing so far has worked out for you, then there is a slight possibility that the problem might be with the power outlet and not your Switch. So, you will need to make it sure that your power outlet is working fine without any issues or errors. You should simply try using some other appliance on the same power outlet and if that works, you are good to go to the next steps.
4. Get the Switch Checked
If nothing has worked out for you so far, then you need to contact the Linksys support department to have your switch checked. There is a possibility that something might have gone on your switch and by contacting Linksys, you can have the problem diagnosed by their expert technicians in a better manner without having to compromise on the warranty or safety.