Netgear Nighthawk is one of the best performing internet routers ever produced by Netgear. It has got almost all of the essential elements that a modern-day router requires. Most users that have been using Netgear Nighthawk have generally positive reviews regarding the router.
But, what if you start facing issues while using the router? Even though it’s not that common, you may be one of those people who are facing such an error. Facing an issue with their router may take things south for you. Recently, many users reported facing a reboot loop in Netgear Nighthawk. If you are someone who is facing the same problem, you should find this article quite helpful.
How To Fix Netgear Nighthawk Keeps Rebooting?
Although there is no particular reason for Netgear Nighthawk rebooting issue, some factors may result in a reboot loop. Through this article, we will be mentioning some of the most common reasons, along with how you can easily fix them. So, let’s get right into it!
1. Firmware Update
Your Netgear Nighthawk may be rebooting continuously because of a firmware update. There are some cases when your router does not support a new update, or it is also possible that you are using an older firmware.
If you do think this to be the main reason behind the reboot loop, then what you need to do is return to the old firmware update. Or if you haven’t updated firmware, then go for an update as soon as possible. It is the most common fix to this issue that will probably work for you.
2. Go For Power Cycle
Sometimes, there may be some glitches in your router. Such a thing may result in a reboot loop, and if not resolved, this may lead you to some annoying issues. So, to avoid such an issue, you will have to go for a power cycle.
To do so, first of all, you will have to give your router a quick restart. Afterward, unplug your router and wait for at least 30 seconds. Now plug-in the power cable and see if the router is working properly or not. If yes, then you should know precisely what to do, which is to follow the given instructions. It will allow you to overcome the issue with minimum effort placed.
3. Faulty Power Cable
One of the primary reasons for the Netgear Nighthawk reboot loop is a damaged power cable. If you have found none of the above steps to work for you, then the issue might be with your power cable. So, before doing anything else, you need to check if the power cord is ok or not. If the issue really is with the power cable, then without wasting a single second, replace the cord. You should be able to use a correctly working Netgear Nighthawk router after replacing the cord.
Conclusion
In this article, we have enriched you with some of the best possible solutions to fix the Netgear Nighthawk reboot loop. Make sure you follow the article for a quick fix.