A few years ago, the internet was only offered in some places including a few coffee shops. But now, after the discovery of Wi-Fi, people want WiFi everywhere. Due to this reason, the internet is also provided in every housing system including high-density housing. This includes apartments and townhouses, shopping malls, inner-city, and suburban areas, etc. This is because the internet has become a need of every human. With that said, WiFi used by many people at once in high-density housing causes many problems. Due to this reason, we will provide you with some recommendations on products and installation techniques of WiFi for high-density housing to help you out. So, without any further ado, let’s get right into it!
Wi-Fi For High Density Housing
1. Set Up Dual Access Points
One of the Wi-Fi setup recommendations for high-density housing is to set up dual access points.
These dual-radio access points should help multiple users with connectivity. Ideally, you would want the dual Access Points to use both 2.4GHz as well as 5GHz. Also, make sure not to place the dual access points too close to each other or the signals will interfere with each other causing network problems.
2. Increase Signal Range
Increasing the signal range means that more area can be covered. Also, more people can access Wi-Fi and use it to do their work with ease. You can install a Wi-Fi extender for this purpose. The Wi-Fi extender increases the overall coverage of the network signals securely. However, it is worth mentioning the fact that the extender can also result in affecting the overall quality of your Wi-Fi, especially if you decide to go for a low-quality one.
3. Checking the Site
The placement of the router also plays a significant role in the Wi-Fi networking system. If the area is unable to receive signals properly, then it is obvious that the quality of Wi-Fi will also be affected. Therefore, it is recommended to install the router and place it at a location where the networking signals can be accessed properly by the router.
Also, choosing the site for your Wi-Fi router should involve planning to avoid any trouble related to Wi-fi coverage and access. Doing so should make sure that you get to enjoy a great browsing experience. Ensure that there isn’t much interference on the site as it can cause various quality concerns.
4. Load Users to Available APs
Another thing that should be kept in mind is that you should not let more than 100 users use a single AP. This is because it will cause more load on the AP which will decrease the quality and overall performance of the Wi-Fi.
5. Upgrading Network Wiring
The quality of wiring used in the networking system also plays a major role in the Wi-Fi availability for users. It is common to use hardwired networking in the internet networking system. If you want to improve the quality and standard of the Wi-Fi signals, then you should make sure that you use the right set of Wi-Fi equipment a high-quality network wiring.
6. Choosing The Right ISP
Choosing the right internet service provider also matters when it comes to high-density housing. There are various ISPs that provide different ranges and coverage for Wi-Fi. Various companies are offering various ranges of networking coverages. You can choose from these ranges to find the best fit for yourself. You can also ask customer support to guide you about it if you do not have enough knowledge regarding such matters.
The Bottom Line
This was everything that you needed to know about Wi-Fi for high-density housing. The compact the area, the higher quality and vast range of Wi-Fi will be required by the people. Therefore, there are various ways to extend the area coverage of your Wi-Fi and improve its quality. We have provided you with some of these methods. Do make sure that you give the article a thorough read to learn all about it.