RAM is one of the most important factors on any PC and you need to make sure that you are getting the right RAM that is fastest and has ample storage as well for you to make it work. So, that is pretty much clear that you are going to need the best RAM out there, but it won’t be enough for you if you are unable to fit it on your PC.
Yes, at times the RAM might not go in and that can be due to a number of reasons that you need to be careful about. If your RAM won’t go in, here are a few things that you will need to know about.
RAM Won’t Go In
1) Get the Right RAM
The first thing is most important and you must know the board you have and all about it. There are different RAM types and they might not all be compatible with each other.
That is why, you will have to make sure that you are checking on all the factors before making a buying decision such as the board you have and the RAM you are purchasing or you might want to upgrade your board as well if you want that RAM that bad.
But, you will certainly have to ensure that the RAM type you are getting is compatible with the board you have.
2) Read instructions
Most of the RAMs that you get on the market these days come with these casings and screws that you will need to unscrew properly before installing the RAM and you will need to be careful about that for sure.
That is why, you will need to make sure that you are reading all the owner manuals that come with your RAM and following the steps there religiously to make it all work for you. If that doesn’t suffice, you can find plenty of videos online that have all the details on them that will help you get it sorted and you will be able to find what needs to be done for the RAM to be installed on the board.
3) Check sockets
There are a number of things on sockets as well that you will need to check. To start with that, you will need to make sure that you are checking all the sockets and they should be clean, and there should be nothing stuck inside the RAM socket that might be causing you to have all these problems with the RAM not going in.
There are also some locks on the socket that needs to be checked and each board that you get have different mechanics that are there to ensure that you are getting it perfectly and that you don’t have to worry about a thing when your RAMs are installed.
So, you will need to make sure that all the locks are unlocked and that the socket is ready to accept the RAM. It might also need a bit of force to install the RAM but be mindful not to put excessive pressure to get the hardware damaged.