AT&T is not only the best cellular network out there, but it is also offering some other great features and services such as the Internet, IPTV services, and a lot more. AT&T also offers Homebase that uses the AT&T cellular network to provide phone service to your cordless or corded phones over their network.
This allows you to have the best use of their services for all sorts of needs. If the Home Base is not working due to some reason, then here are a few things that you must do to get it working.
AT&T Homebase Not Working
1) Check Connectivity
First things first and you need to ensure that your home base is connected with the Wi-Fi network optimally. Make sure that it is connected and the internet light is turned on at the home base. The Wi-Fi network should not only be connected but it should also have the right internet coverage on it. This is going to ensure that you can make it work in an optimal manner and the home base will not have any sorts of issues with it.
2) Restart Router
There might be something wrong with the router that might cause you to have these issues. It is pretty simple and you will not have to face any sorts of issues on the home base once you restart the router perfectly.
To do that, you need to plug out the power cord on your router and let the router sit for a minute. After that, you can plug in the router again and that is going to help you get the right service on your Home Base and it will work without any issues.
3) Restart Home Base
You should also try restarting the home base if there are some issues on it that might be causing you to have a problem with it. Home Base is pretty easy to restart and you just have to push the power button once and turn it on again after a few moments. That is going to help you get a fix for this problem in the right manner.
4) Reset the Homebase
You might also need to reset the home base if nothing has worked out for you so far. Resetting is pretty simple and there is not much that you will need to do. The reset button on the home base is a bit below the surface for security reasons. You will need to press it using the ballpoint or some pin and keep that pressed for 8-10 seconds.
That is going to help you perfectly and after that, it is going to restart once and you will not have to face any problems after it.
5) Contact AT&T
If nothing so far has worked out for you, you will need to contact the AT&T support department and they will be able to help you with it. AT&T support department will be able to diagnose the problem properly with your account and subscription and after that, they will be able to fix it up.